Last Modified: 11-20-2023 6.11:8.1.0 Doc ID: RM100000001ROWR
Model Year Start: 2021 Model: Camry HV Prod Date Range: [10/2020 -           ]
Title: LIGHTING (EXT): HAZARD WARNING SWITCH: INSPECTION; 2021 - 2024 MY Camry HV [10/2020 -        ]

INSPECTION

PROCEDURE

1. INSPECT HAZARD WARNING SIGNAL SWITCH ASSEMBLY

(a) Measure the resistance according to the value(s) in the table below.

Standard Resistance:

Tester Connection

Condition

Specified Condition

6 (TB) - 3 (E)

Hazard warning signal switch off

10 kΩ or higher

Hazard warning signal switch on

Below 1 Ω

If the result is not as specified, replace the hazard warning signal switch assembly.

*a

Component without harness connected

(Hazard Warning Signal Switch Assembly)

(b) Illumination Inspection

(1) Apply auxiliary battery voltage to the hazard warning signal switch assembly and check that the switch illuminates.

OK:

Condition

Specified Condition

Auxiliary battery positive (+) → Terminal 7 (ILL+)

Auxiliary battery negative (-) → Terminal 2 (ILL-)

Illuminates

If the result is not as specified, replace the hazard warning signal switch assembly.