Last Modified: 11-20-2023 6.11:8.1.0 Doc ID: RM100000001RC1R
Model Year Start: 2021 Model: Camry HV Prod Date Range: [10/2020 -           ]
Title: METER / GAUGE / DISPLAY: METER / GAUGE SYSTEM: DATA LIST / ACTIVE TEST; 2021 - 2024 MY Camry HV [10/2020 -        ]

DATA LIST / ACTIVE TEST

DATA LIST

NOTICE:

In the table below, the values listed under "Normal Condition" are reference values. Do not depend solely on these reference values when deciding whether a part is faulty or not.

HINT:

Using the Techstream to read the Data List allows the values or states of switches, sensors, actuators and other items to be read without removing any parts. This non-intrusive inspection can be very useful because intermittent conditions or signals may be discovered before parts or wiring is disturbed. Reading the Data List information early in troubleshooting is one way to save diagnostic time.

(a) Connect the Techstream to the DLC3.

(b) Turn the power switch on (IG).

(c) Turn the Techstream on.

(d) Enter the following menus:

(1) for Combination Meter: Body Electrical / Combination Meter / Data List.

(2) for ABS/VSC/TRAC: Chassis / ABS/VSC/TRAC / Data List.

(3) for Main Body: Body Electrical / Main Body / Data List.

(e) Read the Data List according to the display on the Techstream.

(1) Combination Meter

Body Electrical > Combination Meter > Data List

Tester Display

Measurement Item

Range

Normal Condition

Diagnostic Note

Total Distance Traveled

Total distance traveled

Min.: 0, Max.: 16777215

-

-

Total Distance Traveled - Unit

Total Distance Traveled unit

km or mile

-

-

ODO/TRIP Change Switch

ODO/TRIP switch (Trip switch)

OFF or ON

OFF: Switch released

ON: Switch pushed

-

Light Control Switch (UP)

Light control rheostat up switch (Trip switch)

OFF or ON

OFF: Switch released

ON: Switch pushed

-

Light Control Switch (DOWN)

Light control rheostat down switch (Trip switch)

OFF or ON

OFF: Switch released

ON: Switch pushed

-

Multi Switch (Up)

Up switch (Steering pad switch assembly)

OFF or ON

OFF: Switch released

ON: Switch pushed

-

Multi Switch (Down)

Down switch (Steering pad switch assembly)

OFF or ON

OFF: Switch released

ON: Switch pushed

-

Multi Switch (Left)

Left switch (Steering pad switch assembly)

OFF or ON

OFF: Switch released

ON: Switch pushed

-

Multi Switch (Right)

Right switch (Steering pad switch assembly)

OFF or ON

OFF: Switch released

ON: Switch pushed

-

Multi Switch (Enter)

OK switch (Steering pad switch assembly)

OFF or ON

OFF: Switch released

ON: Switch pushed

-

Multi Switch (Back)

Back switch (Steering pad switch assembly)

OFF or ON

OFF: Switch released

ON: Switch pushed

-

+B Voltage

Auxiliary battery voltage

Min.: 0 V, Max.: 25.5 V or Unset

11 to 14 V

-

Fuel Input

Fuel input

Min.: 0 L, Max.: 655.34 L or Unset

  • Fuel receiver gauge indicates F: 44.37 L
  • Fuel receiver gauge indicates 3/4: 36.98 L
  • Fuel receiver gauge indicates 1/2: 24.65 L
  • Fuel receiver gauge indicates 1/4: 12.33 L
  • Fuel receiver gauge indicates E: 4.93 L

-

Vehicle Speed Meter

Vehicle speed

Min.: 0 km/h, Max.: 255 km/h or Unset

Almost the same as actual vehicle speed

-

Engine RPM

Engine speed

Min.: 0 rpm, Max.: 12700 rpm or Unset

Almost the same as actual tachometer

-

Washer Level Warning Switch

Washer fluid level warning switch

OFF or ON

OFF: Washer fluid level not low

ON: Washer fluid level low

-

Driver Buckle Switch

Driver seat belt buckle switch

Fastened or Not Fastened

Fastened: Driver seat belt buckle switch fastened

Not Fastened: Driver seat belt buckle switch unfastened

Not applicable to this vehicle

Passenger Buckle Switch

Front passenger seat belt buckle switch

Fastened or Not Fastened

Fastened: Front passenger seat belt buckle switch fastened

Not Fastened: Front passenger seat belt buckle switch unfastened

Not applicable to this vehicle

Passenger Occupant Detection Switch

Occupant detection sensor

OFF or ON

OFF: Front passenger seat not occupied

ON: Front passenger seat occupied

Not applicable to this vehicle

Passenger Buckle / Occupant Detection Warning Switch

Front passenger seat belt buckle switch and occupant detection sensor

OFF or ON

OFF: Front passenger seat belt fastened or front passenger seat not occupied

ON: Front passenger seat belt unfastened and front passenger seat occupied

Not applicable to this vehicle

Rear Right Seat Buckle / Occupant Detection Warning Switch

Rear right seat belt buckle switch (Rear seat inner with center belt assembly RH)

OFF or ON

OFF: Rear right seat belt fastened

ON: Rear right seat belt unfastened

-

Rear Left Seat Buckle / Occupant Detection Warning Switch

Rear left seat belt buckle switch (Rear seat inner with center belt assembly LH)

OFF or ON

OFF: Rear left seat belt fastened

ON: Rear left seat belt unfastened

-

Rear Center Seat Buckle / Occupant Detection Warning Switch

Rear center seat belt buckle switch (Rear seat inner with center belt assembly LH)

OFF or ON

OFF: Rear center seat belt fastened

ON: Rear center seat belt unfastened

-

Hazard Flasher Switch

Hazard warning signal switch

OFF or ON

OFF: Hazard warning signal switch off

ON: Hazard warning signal switch on

-

Ambient Temperature (Celsius)

Outside temperature (Celsius)

Min.: -40.0°C, Max.: 87.0°C or Unset

Almost the same as actual outside temperature

-

Ambient Temperature (Fahrenheit)

Outside temperature (Fahrenheit)

Min.: -40°F, Max.: 215°F or Unset

Almost the same as actual outside temperature

-

Lighting System

Existence of headlight control ECU

With or Without

With: w/ Headlight Control ECU

Without: w/o Headlight Control ECU

-

Back Door System

Existence of power back door system

With or Without

With: w/ Power Back Door System

Without: w/o Power Back Door System

-

Oil Pressure Switch

Engine oil pressure switch

OFF or ON

OFF: Engine started

ON: Engine not started

Not applicable to this vehicle

Oil Level Switch

Engine oil level sensor

OFF or ON

OFF: Engine oil level not low

ON: Engine oil level low

-

Coolant Temperature

Engine coolant temperature

Min.: 0°C, Max.: 127.0°C or Unset

75 to 100°C: After warming up engine

-

Integrated value for Maintenance

Maintenance required reminder value

Min.: 0 miles, Max.: 25400 miles or Unset

Driving distance after performing maintenance required reminder reset procedure displayed

-

Brake Fluid Amount

Brake fluid level

OK or Low

OK: Brake fluid level normal

Low: Brake fluid level abnormal

Not applicable to this vehicle

Brake Negative Pressure

Brake vacuum pressure

OK or NG

OK: Brake vacuum pressure normal

NG: Brake vacuum pressure abnormal

Not applicable to this vehicle

TPMS System

Existence of tire pressure warning system

With or Without

With: w/ Tire Pressure Warning System

Without: w/o Tire Pressure Warning System

-

VGRS System

Existence of variable gear ratio steering system

With or Without

With: w/ Variable Gear Ratio Steering System

Without: w/o Variable Gear Ratio Steering System

-

VSC System

Existence of vehicle stability control system

With or Without

With: w/ Vehicle Stability Control System

Without: w/o Vehicle Stability Control System

-

DRS System

Existence of dynamic rear steering system

With or Without

With: w/ Dynamic Rear Steering System

Without: w/o Dynamic Rear Steering System

-

Pop Up Hood System

Existence of pop up hood

With or Without

With: w/ Pop up Hood

Without: w/o Pop up Hood

-

AVS System

Existence of adaptive variable suspension system

With or Without

With: w/ Adaptive Variable Suspension System

Without: w/o Adaptive Variable Suspension System

-

LDA System

Existence of lane tracing assist system

With or Without

With: w/ Lane Tracing Assist System

Without: w/o Lane Tracing Assist System

-

PCS System

Existence of pre-collision system

With or Without

With: w/ Pre-collision System

Without: w/o Pre-collision System

-

ICS System

Existence of parking support brake system

With or Without

With: w/ Parking Support Brake System

Without: w/o Parking Support Brake System

-

Radar Cruise System

Existence of dynamic radar cruise control system

With or Without

With: w/ Dynamic Radar Cruise Control System

Without: w/o Dynamic Radar Cruise Control System

-

Intuitive P/A System

Existence of intuitive parking assist system

With or Without

With: w/ Intuitive Parking Assist System

Without: w/o Intuitive Parking Assist System

-

Road Sign Assist System

Existence of road sign assist system

With or Without

With: w/ Road Sign Assist System

Without: w/o Road Sign Assist System

-

HV/EV System Indicator

Hybrid system indicator value

Min.: -101%, Max.: 511% or Unset

Current hybrid system indicator value

"Unset" is displayed when the vehicle is stopped and the power switch is on (READY).

ODO Display Time After IG OFF Adjust

Setting of ODO display time after the power switch is turned off

30s, 60s, 600s or OFF

Displays customize setting of ODO Display Time After the Power Switch is Turned Off

-

Flasher Sound Volume Adjust

Setting of flasher sound volume adjustment

Large, Medium or Small

Displays customize setting of Flasher Sound Volume Adjustment

-

HINT:

Depending on the specifications of the vehicle, some items may not be displayed.

(2) ABS/VSC/TRAC

Chassis > ABS/VSC/TRAC > Data List

Tester Display

Measurement Item

Range

Normal Condition

Diagnostic Note

Vehicle Speed

Maximum wheel speed sensor

Min.: 0 km/h (0 mph), Max.: 326.4 km/h (203 mph)

Vehicle stopped: 0 km/h (0 mph)

When driving at constant speed: No large fluctuations

(3) Main Body

Body Electrical > Main Body > Data List

Tester Display

Measurement Item

Range

Normal Condition

Diagnostic Note

Suggestion Service Function

Setting of Suggestion Service

OFF, Only Parked or ON

Displays customize setting of Suggestion Service Function

-

ACTIVE TEST

HINT:

Using the Techstream to perform Active Tests allows relays, VSVs, actuators and other items to be operated without removing any parts. This non-intrusive functional inspection can be very useful because intermittent operation may be discovered before parts or wiring is disturbed. Performing Active Tests early in troubleshooting is one way to save diagnostic time. Data List information can be displayed while performing Active Tests.

(a) Connect the Techstream to the DLC3.

(b) Turn the power switch on (IG).

(c) Turn the Techstream on.

(d) Enter the following menus: Body Electrical / Combination Meter / Active Test.

(e) Perform the Active Test according the display on the Techstream.

Body Electrical > Combination Meter > Active Test

Tester Display

Measurement Item

Control Range

Diagnostic Note

Speedometer Operation (0km/h,0MPH)

Speedometer 0 km/h (0 mph)*1

OFF or ON

-

Speedometer Operation (40km/h,40MPH)

Speedometer 40 km/h (40 mph)*1

OFF or ON

The value displayed on the speedometer may deviate.

Reference mph (for Speedometer with Imperial Units for Main Scale):

40 → 39.5 to 42.3

Reference km/h (for Speedometer with Metric Units for Main Scale):

40 → 38.7 to 43.2

Speedometer Operation (80km/h,80MPH)

Speedometer 80 km/h (80 mph)*1

OFF or ON

The value displayed on the speedometer may deviate.

Reference mph (for Speedometer with Imperial Units for Main Scale):

80 → 80.2 to 83.4

Reference km/h (for Speedometer with Metric Units for Main Scale):

80 → 79.3 to 84.3

Speedometer Operation (120km/h,120MPH)

Speedometer 120 km/h (120 mph)*1

OFF or ON

The value displayed on the speedometer may deviate.

Reference mph (for Speedometer with Imperial Units for Main Scale):

120 → 121.1 to 124.3

Reference km/h (for Speedometer with Metric Units for Main Scale):

120 → 120.2 to 125.2

Speedometer Operation (160km/h,160MPH)

Speedometer 160 km/h (160 mph)*1

OFF or ON

The value displayed on the speedometer may deviate.

Reference km/h (for Speedometer with Metric Units for Main Scale):

160 → 161.1 to 166.1

Speedometer Operation (200km/h,200MPH)

Speedometer 200 km/h (200 mph)*1

OFF or ON

The value displayed on the speedometer may deviate.

Reference km/h (for Speedometer with Metric Units for Main Scale):

200 → 202.0 to 207.0

Speedometer Operation (240km/h,240MPH)

Speedometer 240 km/h (240 mph)*1

OFF or ON

The value displayed on the speedometer may deviate.

Reference km/h (for Speedometer with Metric Units for Main Scale):

240 → 242.9 to 247.9

Speedometer Operation (280km/h,280MPH)

Speedometer 280 km/h (280 mph)*1

OFF or ON

-

Speedometer Operation (320km/h,320MPH)

Speedometer 320 km/h (320 mph)*1

OFF or ON

-

Speedometer Operation (360km/h,360MPH)

Speedometer 360 km/h (360 mph)*1

OFF or ON

-

Speedometer Operation (400km/h,400MPH)

Speedometer 400 km/h (400 mph)*1

OFF or ON

-

Fuel Gauge Operation (Sender E)

Fuel receiver gauge (Sender E)

OFF or ON

See [Display 1]

Fuel Gauge Operation (Empty)

Fuel receiver gauge (Empty)

OFF or ON

See [Display 1]

Fuel Gauge Operation (Warning)

Fuel receiver gauge (Warning)

OFF or ON

See [Display 1]

Fuel Gauge Operation (1/4)

Fuel receiver gauge (1/4)

OFF or ON

See [Display 1]

Fuel Gauge Operation (1/2)

Fuel receiver gauge (1/2)

OFF or ON

See [Display 1]

Fuel Gauge Operation (3/4)

Fuel receiver gauge (3/4)

OFF or ON

See [Display 1]

Fuel Gauge Operation (Full)

Fuel receiver gauge (Full)

OFF or ON

See [Display 1]

Fuel Gauge Operation (Sender F)

Fuel receiver gauge (Sender F)

OFF or ON

See [Display 1]

Water Temperature Meter Operation (50C,122F)

Engine coolant temperature receiver gauge 50°C (122°F)

OFF or ON

See [Display 2]

Water Temperature Meter Operation (60C,140F)

Engine coolant temperature receiver gauge 60°C (140°F)

OFF or ON

See [Display 2]

Water Temperature Meter Operation (70C,158F)

Engine coolant temperature receiver gauge 70°C (158°F)

OFF or ON

See [Display 2]

Water Temperature Meter Operation (80C,176F)

Engine coolant temperature receiver gauge 80°C (176°F)

OFF or ON

See [Display 2]

Water Temperature Meter Operation (Middle)

Engine coolant temperature receiver gauge (Middle)

OFF or ON

See [Display 2]

Water Temperature Meter Operation (110C,230F)

Engine coolant temperature receiver gauge 110°C (230°F)

OFF or ON

See [Display 2]

Water Temperature Meter Operation (120C,248F)

Engine coolant temperature receiver gauge 120°C (248°F)

OFF or ON

See [Display 2]

Water Temperature Meter Operation (127C,260F)

Engine coolant temperature receiver gauge 127°C (260°F)

OFF or ON

See [Display 2]

HV/EV System Indicator (MIN)

Hybrid system indicator value (Charge area)

OFF or ON

See [Display 3]

HV/EV System Indicator (-50%)

Hybrid system indicator value (Charge area)

OFF or ON

See [Display 3]

HV/EV System Indicator (0%)

Hybrid system indicator value (HV eco area)

OFF or ON

See [Display 3]

HV/EV System Indicator (100%)

Hybrid system indicator value (Eco area)

OFF or ON

See [Display 3]

HV/EV System Indicator (200%)

Hybrid system indicator value (Power area)

OFF or ON

See [Display 3]

HV/EV System Indicator (300%)

Hybrid system indicator value (Power area)

OFF or ON

See [Display 3]

HV/EV System Indicator (400%)

Hybrid system indicator value (Power area)

OFF or ON

See [Display 3]

HV/EV System Indicator (MAX)

Hybrid system indicator value (Power area)

OFF or ON

See [Display 3]

Buzzer Operation (800Hz, Vol L, W/ Damping)

Combination meter buzzer

  • Frequency: 800Hz
  • Volume: Large
  • Fading tone

ON

-

Buzzer Operation (800Hz, Vol L, W/O Damping)

Combination meter buzzer

  • Frequency: 800Hz
  • Volume: Large
  • Continuous tone

ON

-

Buzzer Operation (800Hz, Vol S, W/ Damping)

Combination meter buzzer

  • Frequency: 800Hz
  • Volume: Small
  • Fading tone

ON

-

Buzzer Operation (800Hz, Vol S, W/O Damping)

Combination meter buzzer

  • Frequency: 800Hz
  • Volume: Small
  • Continuous tone

ON

-

Buzzer Operation (1.6kHz, Vol S, W/O Damping)

Combination meter buzzer

  • Frequency: 1.6kHz
  • Volume: Small
  • Continuous tone

ON

-

Buzzer Operation (2.4kHz, Vol L, W/O Damping)

Combination meter buzzer

  • Frequency: 2.4kHz
  • Volume: Large
  • Continuous tone

ON

-

Multi Display All (White)

Multi-information display (White display)

ON

-

Multi Display Default Screen

Multi-information display (Default screen)

ON

-

Fuel Gauge Indicator

Fuel level warning light

OFF or ON

-

Master Warning

Master warning light

OFF or ON

-

High Beam Indicator

High beam indicator light

OFF or ON

-

Headlamp Indicator

Head indicator light

OFF or ON

-

Taillamp Indicator

Tail indicator light

OFF or ON

-

Automatic High Beam Indicator (Green)

Automatic high beam indicator light

OFF or ON

-

Left Turn Signal Indicator

LH turn indicator light

OFF or ON

-

Right Turn Signal Indicator

RH turn indicator light

OFF or ON

-

Driver Side Seat Belt Warning

Driver or front passenger seat belt warning light

OFF or ON

-

Rear Seat Belt Warning

Rear seat belt warning light

OFF or ON

-

Airbag Warning

SRS warning light

OFF or ON

-

Check Engine Warning

MIL (Check engine warning light)

OFF or ON

-

Brake Warning

Brake warning light / red (malfunction)

OFF or ON

-

Park Warning

Parking brake indicator light

OFF or ON

-

ABS Warning

ABS warning light

OFF or ON

-

ECB Warning

Brake warning light / yellow (minor malfunction)

OFF or ON

-

Slip Warning

Slip indicator light

OFF or ON

-

VSC OFF Indicator

VSC OFF indicator light

OFF or ON

-

Brake Hold Indicator

Brake hold standby indicator light

OFF or ON

-

Hold Indicator

Brake hold operated indicator light

OFF or ON

-

Tire Pressure Warning System Indicator

Tire pressure warning light

OFF or ON

-

EPS Warning

EPS warning light (red)

OFF or ON

-

PPS Warning

EPS warning light (yellow)

OFF or ON

-

PCS OFF Warning

PCS warning light

OFF or ON

-

RCTA Indicator

RCTA indicator light

OFF or ON

-

ICS OFF Warning

PKSB OFF indicator light

OFF or ON

-

Ready Indicator

Ready indicator light

OFF or ON

-

Speed Signal Input (0)

Vehicle speed test signal input (0)*2

OFF or ON

-

Speed Signal Input (40)

Vehicle speed test signal input (40)*2

OFF or ON

The value displayed on the speedometer may deviate.

Reference mph (for Speedometer with Imperial Units for Main Scale):

40 → 39.5 to 42.3

Reference km/h (for Speedometer with Metric Units for Main Scale):

40 → 38.7 to 43.2

Speed Signal Input (80)

Vehicle speed test signal input (80)*2

OFF or ON

The value displayed on the speedometer may deviate.

Reference mph (for Speedometer with Imperial Units for Main Scale):

80 → 80.2 to 83.4

Reference km/h (for Speedometer with Metric Units for Main Scale):

80 → 79.3 to 84.3

Speed Signal Input (120)

Vehicle speed test signal input (120)*2

OFF or ON

The value displayed on the speedometer may deviate.

Reference mph (for Speedometer with Imperial Units for Main Scale):

120 → 121.1 to 124.3

Reference km/h (for Speedometer with Metric Units for Main Scale):

120 → 120.2 to 125.2

Speed Signal Input (160)

Vehicle speed test signal input (160)*2

OFF or ON

The value displayed on the speedometer may deviate.

Reference km/h (for Speedometer with Metric Units for Main Scale):

160 → 161.1 to 166.1

Speed Signal Input (200)

Vehicle speed test signal input (200)*2

OFF or ON

The value displayed on the speedometer may deviate.

Reference km/h (for Speedometer with Metric Units for Main Scale):

200 → 202.0 to 207.0

Speed Signal Input (240)

Vehicle speed test signal input (240)*2

OFF or ON

The value displayed on the speedometer may deviate.

Reference km/h (for Speedometer with Metric Units for Main Scale):

240 → 242.9 to 247.9

Speed Signal Input (280)

Vehicle speed test signal input (280)*2

OFF or ON

-

Speed Signal Input (320)

Vehicle speed test signal input (320)*2

OFF or ON

-

Speed Signal Input (360)

Vehicle speed test signal input (360)*2

OFF or ON

-

Speed Signal Input (400)

Vehicle speed test signal input (400)*2

OFF or ON

-

ODO/TRIP Change Switch

ODO/TRIP switch (Trip switch)

OFF or ON

-

Light Control Switch (UP)

Light control rheostat up switch (Trip switch)

OFF or ON

-

Light Control Switch (DOWN)

Light control rheostat down switch (Trip switch)

OFF or ON

-

Multi Switch (Up)

Up switch (Steering pad switch assembly)

OFF or ON

-

Multi Switch (Down)

Down switch (Steering pad switch assembly)

OFF or ON

-

Multi Switch (Left)

Left switch (Steering pad switch assembly)

OFF or ON

-

Multi Switch (Right)

Right switch (Steering pad switch assembly)

OFF or ON

-

Multi Switch (Enter)

OK switch (Steering pad switch assembly)

OFF or ON

-

Multi Switch (Back)

Back switch (Steering pad switch assembly)

OFF or ON

-

HINT:

  • Depending on the specifications of the vehicle, some items may not be displayed.
  • *1: When this Active Test is performed, an operation signal is sent directly to the combination meter assembly to operate the speedometer.
  • *2: When this Active Test is performed, an actual vehicle speed signal is sent via CAN communication to the combination meter assembly to operate the speedometer. The seat belt warning buzzer, etc. may operate when performing this Active Test.

(1) [Display 1]: Fuel receiver gauge

*a

Fuel Gauge Operation (Sender E)

*b

Fuel Gauge Operation (Empty)

*c

Fuel Gauge Operation (Warning)

*d

Fuel Gauge Operation (1/4)

*e

Fuel Gauge Operation (1/2)

*f

Fuel Gauge Operation (3/4)

*g

Fuel Gauge Operation (Full)

*h

Fuel Gauge Operation (Sender F)

(2) [Display 2]: Engine coolant temperature receiver gauge

*a

Water Temperature Meter Operation 50C (122F)

*b

Water Temperature Meter Operation 60C (140F)

*c

Water Temperature Meter Operation 70C (158F)

*d

Water Temperature Meter Operation 80C (176F)

*e

Water Temperature Meter Operation (Middle)

*f

Water Temperature Meter Operation 110C (230F)

*g

Water Temperature Meter Operation 120C (248F)

*h

Water Temperature Meter Operation 127C (260F)

(3) [Display 3]: Hybrid system indicator

*a

HV System Indicator (MIN)

*b

HV System Indicator (-50%)

*c

HV System Indicator (0%)

*d

HV System Indicator (100%)

*e

HV System Indicator (200%)

*f

HV System Indicator (300%)

*g

HV System Indicator (400%)

*h

HV System Indicator (MAX)