Last Modified: 11-20-2023 6.11:8.1.0 Doc ID: RM100000001L7L8
Model Year Start: 2020 Model: Camry HV Prod Date Range: [09/2019 -           ]
Title: LIGHTING (INT): LIGHTING SYSTEM: OPERATION CHECK; 2020 - 2024 MY Camry HV [09/2019 -        ]

OPERATION CHECK

INSPECT ILLUMINATED ENTRY SYSTEM OPERATION

NOTICE:

Perform this inspection with the customize parameters at the initial settings.

HINT:

Perform this inspection with the door linked switch of the map light (roof console box sub-assembly) on*1 or the switch of the room light assembly in the DOOR position*2.

  • *1: w/ Room Light (for LED Type)
  • *2: w/ Room Light (for Bulb Type)

Control

Condition

Lights that Operate

Actuation Area-linked

With the power switch off and all of the doors closed and locked, enter an exterior detection area while carrying an electrical key transmitter and check that the lights that operate turn on for approximately 15 seconds and then turn off.
  • Map Light (Roof Console Box Sub-assembly)*1
  • Spot Light Assembly*1
  • Room Light Assembly*2
  • Footwell Light (No. 1 Interior Illumination Light Assembly)*3
  • Inside Handle Illumination Light (No. 1 Interior Illumination Light Assembly)*4
  • Instrument Panel Ambient Illumination Light (Instrument Panel Light Assembly)*5

Door Lock/Unlock-linked

With the power switch off and all of the doors closed and locked, unlock any door using an unlock operation (key-linked, wireless or entry unlock operation) and check that the lights that operate turn on for 15 seconds and then turn off.
  • Map Light (Roof Console Box Sub-assembly)*1
  • Spot Light Assembly*1
  • Room Light Assembly*2
  • Footwell Light (No. 1 Interior Illumination Light Assembly)*3
  • Inside Handle Illumination Light (No. 1 Interior Illumination Light Assembly)*4
  • Instrument Panel Ambient Illumination Light (Instrument Panel Light Assembly)*5

Door Open/Close-linked

With the power switch off and all of the doors closed, open any door and check that the lights that operate turn on. While the lights that operate are on, close all of the doors and check that the lights that operate turn off after approximately 15 seconds.
  • Map Light (Roof Console Box Sub-assembly)*1
  • Spot Light Assembly*1
  • Room Light Assembly*2
  • Footwell Light (No. 1 Interior Illumination Light Assembly)*3
  • Inside Handle Illumination Light (No. 1 Interior Illumination Light Assembly)*4
  • Instrument Panel Ambient Illumination Light (Instrument Panel Light Assembly)*5

With the power switch off and all of the doors closed, open any door and check that the light that operates turns on. While the light that operates is on, close all of the doors and check that the light that operates turns off after approximately 40 seconds.

Power Switch Illumination

With the power switch on (IG), open any door and check that the lights that operate turn on. While the lights that operate are on, close all of the doors and check that the lights that operate turn off.
  • Map Light (Roof Console Box Sub-assembly)*1
  • Spot Light Assembly*1
  • Room Light Assembly*2

Power Switch-linked

Turn the power switch from on (ACC) or on (IG) to off and check that the lights that operate turn on for approximately 15 seconds and then turn off.
  • Map Light (Roof Console Box Sub-assembly)*1
  • Spot Light Assembly*1
  • Room Light Assembly*2
  • Footwell Light (No. 1 Interior Illumination Light Assembly)*3
  • Inside Handle Illumination Light (No. 1 Interior Illumination Light Assembly)*4
  • Instrument Panel Ambient Illumination Light (Instrument Panel Light Assembly)*5

Turn the power switch from on (ACC) or on (IG) to off and check that the light that operates turns on for approximately 40 seconds and then turns off.

Power Switch Illumination

Shift Position-linked

With the power switch on (ACC) or on (IG), move the shift lever from P to any other position and check that the lights that operate dim. While the lights that operate are on, move the shift lever to P and check that the lights that operate return to full brightness.
  • Footwell Light (No. 1 Interior Illumination Light Assembly)*3
  • Inside Handle Illumination Light (No. 1 Interior Illumination Light Assembly)*4
  • Instrument Panel Ambient Illumination Light (Instrument Panel Light Assembly)*5
  • *1: w/ Room Light (for LED Type)
  • *2: w/ Room Light (for Bulb Type)
  • *3: w/ Footwell Light
  • *4: w/ Inside Handle Illumination Light
  • *5: w/ Instrument Panel Ambient Illumination Light

INSPECT BATTERY SAVING CONTROL OPERATION

(a) The operations and conditions of this control are described below.

Control

Condition

Lights that Operate

Basic operation

When 20 minutes elapse after the power switch is turned from on (ACC) or on (IG) to off and the lights that operate remain on, the lights are turned off.

HINT:

Battery saving control is canceled when any of the following operations is performed before the lights are turned off by battery saving control. After the operation is performed, the lights remain on for another 20 minutes and then the lights are turned off.

  • The power switch is turned on (ACC) or on (IG).
  • Any door is opened and closed.
  • The luggage compartment door is opened and closed.
  • Any door is unlocked.
  • The key enters any exterior actuation area.
  • Power Switch Illumination
  • Map Light (Roof Console Box Sub-assembly)*1
  • Spot Light Assembly*1
  • Room Light Assembly*2
  • Footwell Light (No. 1 Interior Illumination Light Assembly)*3
  • Inside Handle Illumination Light (No. 1 Interior Illumination Light Assembly)*4
  • Instrument Panel Ambient Illumination Light (Instrument Panel Light Assembly)*5

Interior light auto cut operation

When 20 minutes elapse after the power switch is turned from on (ACC) or on (IG) to off and the lights that operate remain on, the lights are turned off.

HINT:

Battery saving control is canceled when any of the following operations is performed before the lights are turned off by battery saving control. After the operation is performed, the lights remain on for another 20 minutes and then the lights are turned off.

  • The power switch is turned on (ACC) or on (IG).
  • Map Light (Roof Console Box Sub-assembly)*1
  • Spot Light Assembly*1
  • Room Light Assembly*2
  • Vanity Light Assembly*6
  • No. 1 Luggage Compartment Light Assembly
  • Courtesy Light Assembly*7
  • *1: w/ Room Light (for LED Type)
  • *2: w/ Room Light (for Bulb Type)
  • *3: w/ Footwell Light
  • *4: w/ Inside Handle Illumination Light
  • *5: w/ Instrument Panel Ambient Illumination Light
  • *6: w/ Vanity Light
  • *7: w/ Courtesy Light