| Last Modified: 11-20-2023 | 6.11:8.1.0 | Doc ID: RM100000001KZ4S |
| Model Year Start: 2020 | Model: Camry HV | Prod Date Range: [09/2019 - ] |
| Title: CELLULAR COMMUNICATION: BACK-UP BATTERY: REMOVAL; 2020 - 2024 MY Camry HV [09/2019 - ] | ||
REMOVAL
CAUTION / NOTICE / HINT
The necessary procedures (adjustment, calibration, initialization, or registration) that must be performed after parts are removed and installed, or replaced during back-up battery removal/installation are shown below.
Necessary Procedure After Parts Removed/Installed/Replaced
|
Replaced Part or Performed Procedure |
Necessary Procedure |
Effect/Inoperative Function when Necessary Procedure not Performed |
Link |
|---|---|---|---|
|
back-up battery |
Perform the reset back-up battery condition |
Safety connect system |
|
PROCEDURE
1. REMOVE DCM (TELEMATICS TRANSCEIVER) WITH BRACKET
Click here
![2020 MY Camry HV [09/2019 - 10/2020]; CELLULAR COMMUNICATION: DCM(TELEMATICS TRANSCEIVER): REMOVAL](/t3Portal/stylegraphics/info.gif)
2. REMOVE BACK-UP BATTERY
(a) Disengage the 3 claws and 2 guides as shown in the illustration to remove the transceiver cover.
|
Remove in this Direction (1) |
|
Remove in this Direction (2) |
(b) Disconnect the connector.
|
|
Remove in this Direction |
(c) Remove the back-up battery as shown in the illustration.
|
|