| Last Modified: 11-20-2023 | 6.11:8.1.0 | Doc ID: RM100000001KDZG |
| Model Year Start: 2020 | Model: Camry HV | Prod Date Range: [09/2019 - ] |
| Title: A25A-FXS (LUBRICATION): OIL PRESSURE AND TEMPERATURE SENSOR: INSTALLATION; 2020 - 2024 MY Camry HV [09/2019 - ] | ||
INSTALLATION
PROCEDURE
1. INSTALL OIL PRESSURE AND TEMPERATURE SENSOR
(a) Apply adhesive to the area shown in the illustration.
Adhesive:
Toyota Genuine Adhesive 1344, Three Bond 1344 or equivalent
|
*a |
Oil Inlet Port |
|
*b |
3 Threads or More |
|
Adhesive Application Area |
NOTICE:
- Do not apply adhesive to the oil inlet port of the oil pressure and temperature sensor.
- Apply the adhesive to the first 3 threads or more of the oil pressure and temperature sensor.
- Apply adhesive to the entire circumference of the thread.
- To prevent contamination by foreign matter, install immediately after applying adhesive.
(b) Using a 24 mm deep socket wrench, install the oil pressure and temperature sensor.
Torque:
15 N·m {153 kgf·cm, 11 ft·lbf}
NOTICE:
Do not start the engine within 1 hour of installation.
(c) Connect the oil pressure and temperature sensor connector.
2. INSPECT FOR ENGINE OIL LEAK
Click here
![2020 MY Camry HV [09/2019 - 10/2020]; MAINTENANCE: OIL AND OIL FILTER: REPLACEMENT+](/t3Portal/stylegraphics/info.gif)
3. INSTALL NO. 2 ENGINE UNDER COVER ASSEMBLY
Click here
4. INSTALL NO. 1 ENGINE UNDER COVER
Click here
5. INSTALL FRONT WHEEL OPENING EXTENSION PAD LH
Click here
6. INSTALL FRONT WHEEL OPENING EXTENSION PAD RH
Click here
|
|