Last Modified: 11-20-2023 |
6.11:8.1.0 |
Doc ID: RM100000001EZHD |
Model Year Start: 2019 |
Model: Camry HV |
Prod Date Range: [09/2018 - 08/2021] |
Title: MIRROR (INT): INNER REAR VIEW MIRROR (w/ EC Mirror): REMOVAL; 2019 - 2021 MY Camry HV [09/2018 - 08/2021] |
REMOVAL
CAUTION / NOTICE / HINT
The necessary procedures (adjustment, calibration, initialization or registration) that must be performed after parts are removed and installed, or replaced during inner rear view mirror assembly removal/installation are shown below.
Necessary Procedures After Procedure Performed
Replaced Part or Performed Procedure
|
Necessary Procedure
|
Effect/Inoperative Function when Necessary Procedure not Performed
|
Link
|
Replacement of inner rear view mirror assembly
|
Re-registration of codes in the garage door opener system
-
Register transmitter code
-
Rolling code systems
|
Garage door opener system
|
|
PROCEDURE
1. REMOVE INNER REAR VIEW MIRROR STAY HOLDER COVER (w/o Pre-collision System)
(a) Disengage the 2 claws and slide the inner rear view mirror stay holder cover as shown in the illustration.
|
Slide
|
(b) Disengage the 6 claws to remove the inner rear view mirror stay holder cover as shown in the illustration.
|
Remove in this Direction
|
2. REMOVE INNER REAR VIEW MIRROR ASSEMBLY (w/o Pre-collision System)
(a) Disconnect the connector.
|
|
(b) Using a T20 "TORX" socket wrench, remove the screw.
(c) Slide the inner rear view mirror assembly as shown in the illustration to remove it.
|
Remove in this Direction
|
3. REMOVE NO. 2 FORWARD RECOGNITION COVER (w/ Pre-collision System)
Click here
4. REMOVE NO. 1 FORWARD RECOGNITION COVER (w/ Pre-collision System)
Click here
5. REMOVE INNER REAR VIEW MIRROR ASSEMBLY (w/ Pre-collision System)
(a) Disconnect the connector.
|
|
(b) Disengage the clamp.
(c) Using a T20 "TORX" socket wrench, remove the screw.
(d) Slide the inner rear view mirror assembly as shown in the illustration to remove it.
|
Remove in this Direction
|
|