Last Modified: 11-20-2023 |
6.11:8.1.0 |
Doc ID: RM100000001E4W4 |
Model Year Start: 2019 |
Model: Camry HV |
Prod Date Range: [09/2018 - 10/2020] |
Title: HEATING / AIR CONDITIONING: AIR CONDITIONING UNIT: DISASSEMBLY; 2019 - 2020 MY Camry HV [09/2018 - 10/2020] |
DISASSEMBLY
PROCEDURE
1. REMOVE NO. 2 AIR DUCT
(a) Remove the screw.
*a
|
View A
|
|
Front
|
(b) Disengage the 3 claws to remove the No. 2 air duct.
NOTICE:
Be careful not to deform or damage the lower heater case of the air conditioner unit assembly when removing the No. 2 air duct.
2. REMOVE ASPIRATOR
(a) Disengage the guide and 2 claws to remove the aspirator.
|
|
3. REMOVE BLOWER ASSEMBLY
Click here
4. REMOVE AIR CONDITIONING AMPLIFIER ASSEMBLY
(a) Disconnect the connector.
|
Remove in this Direction
|
(b) Remove the screw.
(c) Disengage the guide to remove the air conditioning amplifier assembly as shown in the illustration.
5. REMOVE AIR CONDITIONING HARNESS ASSEMBLY
(a) Disconnect each connector.
|
|
(b) Disengage each clamp to remove the air conditioning harness assembly.
6. REMOVE HEATER COVER
(a) Remove the screw.
|
Remove in this Direction
|
(b) Remove the heater cover as shown in the illustration.
7. REMOVE DRAIN COOLER HOSE
(a) Remove the drain cooler hose.
|
|
8. REMOVE NO. 1 AIR CONDITIONING RADIATOR DAMPER SERVO SUB-ASSEMBLY
(a) Remove the 3 screws and No. 1 air conditioning radiator damper servo sub-assembly.
|
|
9. REMOVE NO. 2 AIR CONDITIONING RADIATOR DAMPER SERVO SUB-ASSEMBLY
(a) Remove the 2 screws and No. 2 air conditioning radiator damper servo sub-assembly.
|
|
10. REMOVE NO. 3 AIR CONDITIONING RADIATOR DAMPER SERVO SUB-ASSEMBLY
(a) Remove the 2 screws and No. 3 air conditioning radiator damper servo sub-assembly.
|
|
11. REMOVE HEATER PIPE GROMMET
(a) Remove the heater pipe grommet.
|
|
12. REMOVE HEATER CLAMP
(a) Disengage the 3 claws to remove the heater clamp.
|
|
13. REMOVE HEATER RADIATOR UNIT SUB-ASSEMBLY
|
Remove in this Direction
|
(a) Remove the heater radiator unit sub-assembly as shown in the illustration.
NOTICE:
Prepare a drain pan or cloth in case the coolant leaks.
14. REMOVE GROMMET SUB-ASSEMBLY
(a) Remove the grommet sub-assembly.
|
|
15. REMOVE COOLER EXPANSION VALVE
(a) Using a 4 mm hexagon socket wrench, remove the 2 hexagon bolts and cooler expansion valve.
|
|
(b) Remove the 2 O-rings from the No. 1 cooler evaporator sub-assembly.
16. REMOVE NO. 1 COOLER EVAPORATOR SUB-ASSEMBLY
(a) Remove the 2 screws.
(b) Disengage the 10 claws to remove the upper heater case with No. 1 cooler evaporator sub-assembly from the lower heater case.
(d) Remove the No. 1 cooler evaporator sub-assembly with No. 1 cooler thermistor from the upper heater case.
17. REMOVE NO. 1 COOLER THERMISTOR
Click here
|