Last Modified: 11-20-2023 |
6.11:8.1.0 |
Doc ID: RM10000000164IC |
Model Year Start: 2018 |
Model: Camry HV |
Prod Date Range: [07/2017 -
] |
Title: A25A-FXS (EMISSION CONTROL): PCV VALVE: REMOVAL; 2018 - 2024 MY Camry HV [07/2017 - ] |
REMOVAL
CAUTION / NOTICE / HINT
The necessary procedures (adjustment, calibration, initialization or registration) that must be performed after parts are removed and installed, or replaced during PCV valve (ventilation valve sub-assembly) removal/installation are shown below.
Necessary Procedures After Parts Removed/Installed/Replaced
Replaced Part or Performed Procedure
|
Necessary Procedures
|
Effect/Inoperative Function when Necessary Procedure not Performed
|
Link
|
-
Replacement of throttle body assembly
-
Cleaning the deposits from the throttle body assembly
-
Gas leak from exhaust system is repaired
|
Inspection After Repair
|
-
Poor idle, etc.
-
Engine start function, etc.
|
|
NOTICE:
This procedure includes the removal of small-head bolts. Refer to Small-Head Bolts of Basic Repair Hint to identify the small-head bolts.
Click here
PROCEDURE
1. REMOVE INTAKE MANIFOLD
Click here
2. REMOVE PCV VALVE (VENTILATION VALVE SUB-ASSEMBLY)
(a) Remove the PCV valve (ventilation valve sub-assembly) from the cylinder head sub-assembly.
|
|
|