| Last Modified: 11-20-2023 | 6.11:8.1.0 | Doc ID: RM10000000163Z7 |
| Model Year Start: 2018 | Model: Camry HV | Prod Date Range: [07/2017 - 10/2020] |
| Title: PARK ASSIST / MONITORING: PANORAMIC VIEW MONITOR SYSTEM: U0100,U0126,U0129,U0140,U0163,U0233; Lost Communication with ECM / PCM "A"; 2018 - 2020 MY Camry HV [07/2017 - 10/2020] | ||
|
DTC |
U0100 |
Lost Communication with ECM / PCM "A" |
|
DTC |
U0126 |
Lost Communication with Steering Angle Sensor Module |
|
DTC |
U0129 |
Lost Communication with Brake System Control Module |
|
DTC |
U0140 |
Lost Communication with Body Control Module |
|
DTC |
U0163 |
Lost Communication with Navigation Control Module |
|
DTC |
U0233 |
Lost Communication with Blind Spot Monitor Master Module |
DESCRIPTION
- These DTCs are stored if there is a malfunction in the CAN communication system connected to the rear television camera controller.
- These DTCs are stored if there is a malfunction in the CAN communication system connected to the rear television camera assembly.
HINT:
If CAN communication system DTCs are stored, they may also be stored in other systems.
Television Camera Controller
|
DTC No. |
Detection Item |
DTC Detection Condition |
Trouble Area |
DTC Output from |
|---|---|---|---|---|
|
U0100 |
Lost Communication with ECM / PCM "A" |
Lost communication with hybrid vehicle control ECU assembly |
CAN communication system |
Panoramic View Monitor |
|
U0126 |
Lost Communication with Steering Angle Sensor Module |
Lost communication with steering sensor |
CAN communication system |
Panoramic View Monitor |
|
U0129 |
Lost Communication with Brake System Control Module |
Lost communication with skid control ECU |
CAN communication system |
Panoramic View Monitor |
|
U0140 |
Lost Communication with Body Control Module |
Lost communication with main body ECU (multiplex network body ECU) |
CAN communication system |
Panoramic View Monitor |
|
U0163 |
Lost Communication with Navigation Control Module |
Lost communication with radio and display receiver assembly |
CAN communication system |
Panoramic View Monitor |
|
U0233 |
Lost Communication with Blind Spot Monitor Master Module |
Lost communication with blind spot monitor sensor RH |
CAN communication system |
Panoramic View Monitor |
Rear Television Camera Assembly
|
DTC No. |
Detection Item |
DTC Detection Condition |
Trouble Area |
DTC Output from |
|---|---|---|---|---|
|
U0100 |
Lost Communication with ECM / PCM "A" |
Lost communication with hybrid vehicle control ECU assembly |
CAN communication system |
Parking Assist Camera |
|
U0126 |
Lost Communication with Steering Angle Sensor Module |
Lost communication with steering sensor |
CAN communication system |
Parking Assist Camera |
|
U0129 |
Lost Communication with Brake System Control Module |
Lost communication with skid control ECU |
CAN communication system |
Parking Assist Camera |
|
U0140 |
Lost Communication with Body Control Module |
Lost communication with main body ECU (multiplex network body ECU) |
CAN communication system |
Parking Assist Camera |
|
U0163 |
Lost Communication with Navigation Control Module |
Lost communication with radio and display receiver assembly |
CAN communication system |
Parking Assist Camera |
|
U0233 |
Lost Communication with Blind Spot Monitor Master Module |
Lost communication with blind spot monitor sensor RH |
CAN communication system |
Parking Assist Camera |
PROCEDURE
|
1. |
CHECK DTC OUTPUT |
(a) Clear the DTCs.
Chassis > Panoramic View Monitor > Clear DTCs
Chassis > Parking Assist Camera > Clear DTCs
(b) Recheck for DTCs and check that no DTCs are output.
Chassis > Panoramic View Monitor > Trouble Codes
Chassis > Parking Assist Camera > Trouble Codes
HINT:
- If CAN communication system DTCs are stored, they may also be stored in other systems.
- If the CAN communication system has been inspected and repaired in other systems, the DTCs will not be output when rechecking for DTCs.
-
If these DTCs are output frequently, duplicate the conditions that cause the problem symptoms and perform the troubleshooting again, even if the DTC was not output when rechecking for DTCs.
Click here
![2018 MY Camry HV [07/2017 - 09/2018]; INTRODUCTION: HOW TO TROUBLESHOOT ECU CONTROLLED SYSTEMS: HOW TO PROCEED WITH TROUBLESHOOTING](/t3Portal/stylegraphics/info.gif)
|
Result |
Proceed to |
|---|---|
|
DTCs are output |
A |
|
No DTCs are output |
B |
| A |
|
| B |
|
USE SIMULATION METHOD TO CHECK
|
|
|