Last Modified: 11-20-2023 6.11:8.1.0 Doc ID: RM10000000163Z2
Model Year Start: 2018 Model: Camry HV Prod Date Range: [07/2017 - 10/2020]
Title: PARK ASSIST / MONITORING: PANORAMIC VIEW MONITOR SYSTEM: C2A5C; BSM Buzzer Sound Request Signal Malfunction; 2018 - 2020 MY Camry HV [07/2017 - 10/2020]

DTC

C2A5C

BSM Buzzer Sound Request Signal Malfunction

DESCRIPTION

This DTC is stored when the rear television camera assembly receives an invalid communication signal from the blind spot monitor sensor RH.

DTC No.

Detection Item

DTC Detection Condition

Trouble Area

DTC Output from

C2A5C

BSM Buzzer Sound Request Signal Malfunction

An invalid communication signal is received from the blind spot monitor sensor RH

Rear television camera assembly

Parking Assist Camera

CAUTION / NOTICE / HINT

NOTICE:

  • When "!" is displayed on the radio and display receiver assembly after the cable is disconnected from the negative (-) auxiliary battery terminal, correct the steering angle neutral point.

    Click here 2018 - 2020 MY Camry HV [07/2017 - 10/2020]; PARK ASSIST / MONITORING: PANORAMIC VIEW MONITOR SYSTEM: INITIALIZATION

  • Depending on the parts that are replaced or operations that are performed during vehicle inspection or maintenance, calibration of other systems as well as the panoramic view monitor system may be needed.

    Click here 2018 - 2020 MY Camry HV [07/2017 - 10/2020]; PARK ASSIST / MONITORING: PANORAMIC VIEW MONITOR SYSTEM: CALIBRATION

PROCEDURE

1.

CHECK DTC OUTPUT

(a) Clear the DTCs.

Chassis > Parking Assist Camera > Clear DTCs

(b) Recheck for DTCs and check that no DTCs are output.

Chassis > Parking Assist Camera > Trouble Codes

Result

Proceed to

DTC C2A5C is output

A

DTC C2A5C is not output

B

A

REPLACE REAR TELEVISION CAMERA ASSEMBLY

B

END