| Last Modified: 11-20-2023 | 6.11:8.1.0 | Doc ID: RM10000000163YH |
| Model Year Start: 2018 | Model: Camry HV | Prod Date Range: [07/2017 - 10/2020] |
| Title: PARK ASSIST / MONITORING: PANORAMIC VIEW MONITOR SYSTEM: C164D; Wheel Speed Sensor Malfunction; 2018 - 2020 MY Camry HV [07/2017 - 10/2020] | ||
|
DTC |
C164D |
Wheel Speed Sensor Malfunction |
DESCRIPTION
- This DTC is stored when the television camera controller receives a wheel speed sensor (front speed sensor RH or front speed sensor LH, rear speed sensor RH or rear speed sensor LH) abnormality signal from the electronically controlled brake system via CAN communication.
- This DTC is stored when the rear television camera assembly receives a wheel speed sensor (front speed sensor RH or front speed sensor LH, rear speed sensor RH or rear speed sensor LH) abnormality signal from the electronically controlled brake system via CAN communication.
Television Camera Controller
|
DTC No. |
Detection Item |
DTC Detection Condition |
Trouble Area |
DTC Output from |
|---|---|---|---|---|
|
C164D |
Wheel Speed Sensor Malfunction |
Wheel speed sensor malfunction |
Electronically controlled brake system |
Panoramic View Monitor |
Rear Television Camera Assembly
|
DTC No. |
Detection Item |
DTC Detection Condition |
Trouble Area |
DTC Output from |
|---|---|---|---|---|
|
C164D |
Wheel Speed Sensor Malfunction |
Wheel speed sensor malfunction |
Electronically controlled brake system |
Parking Assist Camera |
PROCEDURE
|
1. |
CHECK FOR DTC |
(a) Clear the DTCs.
Chassis > Panoramic View Monitor > Clear DTCs
Chassis > Parking Assist Camera > Clear DTCs
(b) Check for DTCs.
Chassis > Panoramic View Monitor > Trouble Codes
Chassis > Parking Assist Camera > Trouble Codes
|
Result |
Proceed to |
|---|---|
|
No DTCs are output |
A |
|
DTC C164D is output ("Panoramic View Monitor") |
B |
|
DTC C164D is output ("Parking Assist Camera") |
C |
HINT:
If the television camera controller cannot read the stored information when activated, allowing the ECU to store the information again may return the system to normal.
HINT:
- The DTC is stored when a malfunction occurs in the electronically controlled brake system.
- If troubleshooting and repair of the malfunction in the electronically controlled brake system have been completed, DTC C164D will not be output again when rechecking for DTCs.
-
If DTC C164D is stored frequently, duplicate the problem symptoms and perform troubleshooting again even if the DTC is not output when rechecking for DTCs.
Click here
![2018 - 2020 MY Camry HV [07/2017 - 10/2020]; PARK ASSIST / MONITORING: PANORAMIC VIEW MONITOR SYSTEM: PROBLEM SYMPTOMS TABLE](/t3Portal/stylegraphics/info.gif)
| A |
|
USE SIMULATION METHOD TO CHECK
|
| B |
|
GO TO ELECTRONICALLY CONTROLLED BRAKE SYSTEM
|
| C |
|
|
|