Last Modified: 11-20-2023 6.11:8.1.0 Doc ID: RM10000000162JI
Model Year Start: 2018 Model: Camry HV Prod Date Range: [07/2017 - 10/2020]
Title: AUDIO / VIDEO: AUDIO AND VISUAL SYSTEM: CD Sound Skips; 2018 - 2020 MY Camry HV [07/2017 - 10/2020]

CD Sound Skips

CAUTION / NOTICE / HINT

NOTICE:

  • Depending on the parts that are replaced during vehicle inspection or maintenance, performing initialization, registration or calibration may be needed. Refer to Precaution for Audio and Visual System.

    Click here 2018 - 2020 MY Camry HV [07/2017 - 10/2020]; AUDIO / VIDEO: AUDIO AND VISUAL SYSTEM: PRECAUTION

  • When replacing the radio and display receiver assembly, always replace it with a new one. If a radio and display receiver assembly which was installed to another vehicle is used, the following may occur:
    • A communication malfunction DTC may be stored.
    • The radio and display receiver assembly may not operate normally.

PROCEDURE

1.

CHECK CD

(a) Check that the CD is not deformed or cracked.

OK:

CD is not cracked or deformed.
NG

END (CD IS FAULTY)
OK

2.

CHECK CD

(a) Check the CD.

OK:

The CD is clean.

NOTICE:

Do not use a conventional record cleaner or anti-static preservative.

HINT:

If dirt is on the CD surface, wipe it clean with a soft cloth from the inside to the outside in a radial direction.
NG

CLEAN CD
OK

3.

REPLACE CD AND RECHECK

(a) Replace the CD with a new or known good one and check that the malfunction disappears.

OK:

Malfunction disappears.

OK

END (CD WAS FAULTY)
NG

4.

CHECK RADIO AND DISPLAY RECEIVER ASSEMBLY

(a) Check the radio and display receiver assembly installation condition.

(1) Check that the radio and display receiver assembly is properly installed.

OK:

The radio and display receiver assembly is properly installed.

OK

REPLACE RADIO AND DISPLAY RECEIVER ASSEMBLY

NG

REINSTALL RADIO AND DISPLAY RECEIVER ASSEMBLY