Last Modified: 11-20-2023 6.11:8.1.0 Doc ID: RM10000000162J8
Model Year Start: 2018 Model: Camry HV Prod Date Range: [07/2017 - 10/2020]
Title: AUDIO / VIDEO: AUDIO AND VISUAL SYSTEM: B1551,B158D,B15A0,B15B0,B15B3,B15B4,B15B7,B15BA,B15F9; HD Radio Tuner Malfunction; 2018 - 2020 MY Camry HV [07/2017 - 10/2020]

DTC

B1551

HD Radio Tuner Malfunction

DTC

B158D

Video Signal Stoppage

DTC

B15A0

LAN Master Malfunction

DTC

B15B0

Display Screen Malfunction

DTC

B15B3

Radio Tuner Malfunction

DTC

B15B4

CD Changer Malfunction

DTC

B15B7

Bluetooth Module Malfunction

DTC

B15BA

XM Tuner Malfunction

DTC

B15F9

UART Communication Malfunction(for A/C)

DESCRIPTION

These DTCs are stored when a malfunction occurs in the radio and display receiver assembly.

DTC No.

Detection Item

DTC Detection Condition

Trouble Area

B1551

HD Radio Tuner Malfunction

When any of the following conditions is met:

  • "HD Radio" tuner decorder malfunction
  • "HD Radio" tuner audio output section malfunction
  • "HD Radio" tuner decorder RF/IF malfunction

Radio and display receiver assembly

B158D

Video Signal Stoppage

The internal video signal of the radio and display receiver assembly is interrupted

Radio and display receiver assembly

B15A0

LAN Master Malfunction

When either of the following conditions is met:

  • Bus malfunction
  • EEPROM error

Radio and display receiver assembly

B15B0

Display Screen Malfunction

Picture circuit (TFT unit) malfunction

Radio and display receiver assembly

B15B3

Radio Tuner Malfunction

When any of the following conditions is met:

  • AM tuner PLL is unlocked
  • FM tuner PLL is unlocked
  • Tuner malfunction

Radio and display receiver assembly

B15B4

CD Changer Malfunction

When any of the following conditions is met:

  • Mechanism drive signal malfunction
  • Load/Eject malfunction
  • Read mechanism malfunction
  • Mechanical malfunction

Radio and display receiver assembly

B15B7

Bluetooth Module Malfunction

"Bluetooth" module malfunction

Radio and display receiver assembly

B15BA

XM Tuner Malfunction

When either condition below is met:

  • Internal IC malfunction
  • Tuner malfunction

Radio and display receiver assembly

B15F9

UART Communication Malfunction(for A/C)

When either of the following conditions is met:

  • Open in UART communication line is detected during radio and display receiver assembly startup routine
  • Open in UART communication line is detected based on communication error

Radio and display receiver assembly

CAUTION / NOTICE / HINT

NOTICE:

  • Depending on the parts that are replaced during vehicle inspection or maintenance, performing initialization, registration or calibration may be needed. Refer to Precaution for Audio and Visual System.

    Click here 2018 - 2020 MY Camry HV [07/2017 - 10/2020]; AUDIO / VIDEO: AUDIO AND VISUAL SYSTEM: PRECAUTION

  • When replacing the radio and display receiver assembly, always replace it with a new one. If a radio and display receiver assembly which was installed to another vehicle is used, the following may occur:
    • A communication malfunction DTC may be stored.
    • The radio and display receiver assembly may not operate normally.

PROCEDURE

1.

CHECK DTC

(a) Clear the DTCs.

Body Electrical > Navigation System > Clear DTCs

(b) Recheck for DTCs and check that no DTCs are output.

Body Electrical > Navigation System > Trouble Codes

OK:

No DTCs are output.

OK

USE SIMULATION METHOD TO CHECK 2018 MY Camry HV [07/2017 - 09/2018]; INTRODUCTION: HOW TO TROUBLESHOOT ECU CONTROLLED SYSTEMS: HOW TO PROCEED WITH TROUBLESHOOTING 2019 MY Camry HV [09/2018 - 09/2019]; INTRODUCTION: HOW TO TROUBLESHOOT ECU CONTROLLED SYSTEMS: HOW TO PROCEED WITH TROUBLESHOOTING 2020 MY Camry HV [09/2019 - 10/2020]; INTRODUCTION: HOW TO TROUBLESHOOT ECU CONTROLLED SYSTEMS: HOW TO PROCEED WITH TROUBLESHOOTING

NG

REPLACE RADIO AND DISPLAY RECEIVER ASSEMBLY