| Last Modified: 11-20-2023 | 6.11:8.1.0 | Doc ID: RM10000000162EB |
| Model Year Start: 2018 | Model: Camry HV | Prod Date Range: [07/2017 - 08/2022] |
| Title: SUPPLEMENTAL RESTRAINT SYSTEMS: REAR AIRBAG SENSOR: ON-VEHICLE INSPECTION; 2018 - 2022 MY Camry HV [07/2017 - 08/2022] | ||
ON-VEHICLE INSPECTION
CAUTION / NOTICE / HINT
CAUTION:
Be sure to correctly follow the removal and installation procedures for the side No. 2 airbag sensors.
PROCEDURE
1. INSPECT SIDE NO. 2 AIRBAG SENSOR (for Vehicle not Involved in Collision)
(a) Perform a diagnostic system check.
Click here
![2018 - 2024 MY Camry HV [07/2017 - ]; SUPPLEMENTAL RESTRAINT SYSTEMS: AIRBAG SYSTEM: DTC CHECK / CLEAR](/t3Portal/stylegraphics/info.gif)
2. INSPECT SIDE NO. 2 AIRBAG SENSOR (for Vehicle Involved in Collision and Airbag not Deployed)
(a) Perform a diagnostic system check.
Click here
(b) Visually check the side No. 2 airbag sensors for defects if a quarter panel of the vehicle or the area around a quarter panel is damaged.
HINT:
The defects are as follows:
- Cracks in the sensor housing
- Dents in the sensor housing
- Chips in the sensor housing
- Cracks or other damage to the connector
- Damage to the serial number
OK:
No defects are found.
If any defects are found, replace the side No. 2 airbag sensor with a new one.
3. INSPECT SIDE NO. 2 AIRBAG SENSOR (for Vehicle Involved in Collision and Airbag is Deployed)
(a) When airbags have deployed as the result of a collision, be sure to replace all side No. 2 airbag sensors in the damaged areas (anywhere in need of repair).
(b) Visually check the side No. 2 airbag sensors in undamaged areas for defects.
HINT:
The defects are as follows:
- Cracks in the sensor housing
- Dents in the sensor housing
- Chips in the sensor housing
- Cracks or other damage to the connector
- Damage to the serial number
OK:
No defects are found.
If any defects are found or a side No. 2 airbag sensor has detected a major collision, replace the side No. 2 airbag sensor with a new one.
|
|