| Last Modified: 11-20-2023 | 6.11:8.1.0 | Doc ID: RM10000000162DQ |
| Model Year Start: 2018 | Model: Camry HV | Prod Date Range: [07/2017 - ] |
| Title: SUPPLEMENTAL RESTRAINT SYSTEMS: REAR SEAT SIDE AIRBAG ASSEMBLY: ON-VEHICLE INSPECTION; 2018 - 2024 MY Camry HV [07/2017 - ] | ||
ON-VEHICLE INSPECTION
CAUTION / NOTICE / HINT
CAUTION:
Be sure to correctly follow the removal and installation procedures for the rear seat airbag assemblies.
PROCEDURE
1. INSPECT REAR SEAT AIRBAG ASSEMBLY (for Vehicle not Involved in Collision)
(a) Perform a diagnostic system check.
Click here
![2018 - 2024 MY Camry HV [07/2017 - ]; SUPPLEMENTAL RESTRAINT SYSTEMS: AIRBAG SYSTEM: DTC CHECK / CLEAR](/t3Portal/stylegraphics/info.gif)
(b) Visually check for defects with the rear seat airbag assemblies installed to the vehicle.
HINT:
The defects are as follows:
- Scratches, broken or frayed threads on the surface of the rear side seatback assembly around the rear seat airbag assemblies
- Small cracks in the rear side seatback assembly around the rear seat airbag assemblies
- Significant discoloration on the rear side seatback assembly around the rear seat airbag assemblies
OK:
No defects are found.
If any defects are found, replace the rear side seatback pad or rear side seatback cover sub-assembly with a new one.
2. INSPECT REAR SEAT AIRBAG ASSEMBLY (for Vehicle Involved in Collision and Airbag not Deployed)
(a) Perform a diagnostic system check.
Click here
(b) Visually check for defects with the rear seat airbag assemblies removed from the vehicle.
HINT:
The defects are as follows:
- Scratches, broken or frayed threads on the surface of the base fabric of the rear seat airbag assemblies
- Marks from being dropped
- Deformation of the installation surface of the rear seat airbag assemblies
- Cracks or other damage to the wire harness or connector
OK:
No defects are found.
If any defects are found, replace the rear seat airbag assembly with a new one.
|
|