| Last Modified: 11-20-2023 | 6.11:8.1.0 | Doc ID: RM10000000162D6 |
| Model Year Start: 2018 | Model: Camry HV | Prod Date Range: [07/2017 - ] |
| Title: SUPPLEMENTAL RESTRAINT SYSTEMS: FRONT PASSENGER AIRBAG ASSEMBLY: INSTALLATION; 2018 - 2024 MY Camry HV [07/2017 - ] | ||
INSTALLATION
PROCEDURE
1. INSTALL NO. 5 INSTRUMENT PANEL WIRE
(a) Connect the 2 airbag connectors of the No. 5 instrument panel wire to the instrument panel passenger airbag assembly.
|
*a |
Airbag Connector |
|
*b |
Airbag Connector Locking Button |
|
Push in this Direction |
NOTICE:
- When connecting any airbag connector, take care not to damage the airbag wire harness.
- Be sure to only connect the connectors to each corresponding color.
(b) Push in the 2 airbag connector locking buttons to install the 2 airbag connectors to the instrument panel passenger airbag assembly.
2. INSTALL INSTRUMENT PANEL PASSENGER AIRBAG ASSEMBLY
|
(a) Engage the 3 hooks. |
|
|
(b) Push in the instrument panel passenger airbag assembly to engage the 3 hooks. |
|
|
(c) Install the instrument panel passenger airbag assembly with the 2 screws. |
|
(d) Engage the clamp.
3. INSTALL INSTRUMENT PANEL SAFETY PAD SUB-ASSEMBLY
Click here
![2018 - 2020 MY Camry HV [07/2017 - 10/2020]; INTERIOR PANELS / TRIM: INSTRUMENT PANEL SAFETY PAD: INSTALLATION+](/t3Portal/stylegraphics/info.gif)
4. CONNECT NO. 5 INSTRUMENT PANEL WIRE
(a) Check that the power switch is off.
(b) Check that the cable is disconnected from the negative (-) auxiliary battery terminal.
CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) auxiliary battery terminal to disable the SRS system.
|
(c) Connect the connector. NOTICE: When connecting any airbag connector, take care not to damage the airbag wire harness. |
|
5. INSTALL NO. 1 INSTRUMENT PANEL REGISTER ASSEMBLY
Click here
|
|