Last Modified: 11-20-2023 |
6.11:8.1.0 |
Doc ID: RM10000000162CS |
Model Year Start: 2018 |
Model: Camry HV |
Prod Date Range: [07/2017 - 10/2020] |
Title: SUPPLEMENTAL RESTRAINT SYSTEMS: SPIRAL CABLE: INSPECTION; 2018 - 2020 MY Camry HV [07/2017 - 10/2020] |
INSPECTION
PROCEDURE
1. INSPECT SPIRAL CABLE SUB-ASSEMBLY
NOTICE:
-
Do not remove the steering sensor from the spiral cable sub-assembly when inspecting the spiral cable sub-assembly.
-
Remove the steering sensor from the spiral cable sub-assembly only when replacing the spiral cable sub-assembly.
(a) Visually check the spiral cable sub-assembly for defects.
(1) The defects are as follows:
-
Scratches
-
Small cracks
-
Dents
-
Chips
-
Cracks or other damage to the connector
OK:
No defects are found.
If any of the defects is found, replace the spiral cable sub-assembly with a new one.
(b) Check the spiral cable sub-assembly.
*a
|
Component without harness connected
(Spiral Cable Sub-assembly)
|
*b
|
Color: Light Green
|
*c
|
Color: Black
|
-
|
-
|
|
Interlock
|
-
|
-
|
NOTICE:
-
When rotating the spiral cable sub-assembly, make sure to push on the interlock shown in the illustration to release the interlock mechanism.
-
As the spiral cable sub-assembly may break, do not rotate the spiral cable sub-assembly more than the specified amount.
(1) Set the spiral cable sub-assembly to the center position.
Click here
(2) Measure the resistance between each terminal of the spiral cable sub-assembly according to the value(s) in the table below.
Standard Resistance:
Tester Connection
|
Condition
|
Specified Condition
|
K22-1 (SDN) - z4-4 (SDN)
|
Always
|
3 Ω or less
|
K22-2 (ECC) - z4-3 (ECC)
|
Always
|
3 Ω or less
|
K22-2 (ECC) - z1-12 (ECC)
|
Always
|
3 Ω or less
|
K22-4 (EAU) - z1-10 (EAU)
|
Always
|
3 Ω or less
|
K22-5 (AU2) - z1-9 (AU2)
|
Always
|
3 Ω or less
|
K22-6 (DIST) - z1-8 (DIST)
|
Always
|
3 Ω or less
|
K22-7 (HO) - A (HO)
|
Always
|
3 Ω or less
|
K22-8 (SUP) - z4-2 (SUP)
|
Always
|
3 Ω or less
|
K22-9 (IL-2) - z1-6 (IL-2)
|
Always
|
3 Ω or less
|
K22-10 (+DP2) - z1-5 (+DP2)
|
Always
|
3 Ω or less
|
K22-11 (+DP) - z1-4 (+DP)
|
Always
|
3 Ω or less
|
K22-12 (AU1) - z1-3 (AU1)
|
Always
|
3 Ω or less
|
K22-13 (CCS) - z1-2 (CCS)
|
Always
|
3 Ω or less
|
K22-14 (IL+2) - z1-1 (IL+2)
|
Always
|
3 Ω or less
|
K24-1 (D+) - z2-2 (D+)
|
Always
|
Below 1 Ω
|
K24-2 (D-) - z2-1 (D-)
|
Always
|
Below 1 Ω
|
K24-3 (D2-) - z3-1 (D2-)
|
Always
|
Below 1 Ω
|
K24-4 (D2+) - z3-2 (D2+)
|
Always
|
Below 1 Ω
|
(3) After setting the spiral cable sub-assembly to the center position, rotate the spiral cable sub-assembly 2.5 times clockwise, and measure the resistance according to the value(s) in the table below. Then rotate the spiral cable sub-assembly 5 times counterclockwise, and measure the resistance according to the value(s) in the table below.
Standard Resistance:
Tester Connection
|
Condition
|
Specified Condition
|
K22-1 (SDN) - z4-4 (SDN)
|
Always
|
3 Ω or less
|
K22-2 (ECC) - z4-3 (ECC)
|
Always
|
3 Ω or less
|
K22-2 (ECC) - z1-12 (ECC)
|
Always
|
3 Ω or less
|
K22-4 (EAU) - z1-10 (EAU)
|
Always
|
3 Ω or less
|
K22-5 (AU2) - z1-9 (AU2)
|
Always
|
3 Ω or less
|
K22-6 (DIST) - z1-8 (DIST)
|
Always
|
3 Ω or less
|
K22-7 (HO) - A (HO)
|
Always
|
3 Ω or less
|
K22-8 (SUP) - z4-2 (SUP)
|
Always
|
3 Ω or less
|
K22-9 (IL-2) - z1-6 (IL-2)
|
Always
|
3 Ω or less
|
K22-10 (+DP2) - z1-5 (+DP2)
|
Always
|
3 Ω or less
|
K22-11 (+DP) - z1-4 (+DP)
|
Always
|
3 Ω or less
|
K22-12 (AU1) - z1-3 (AU1)
|
Always
|
3 Ω or less
|
K22-13 (CCS) - z1-2 (CCS)
|
Always
|
3 Ω or less
|
K22-14 (IL+2) - z1-1 (IL+2)
|
Always
|
3 Ω or less
|
K24-1 (D+) - z2-2 (D+)
|
Always
|
Below 1 Ω
|
K24-2 (D-) - z2-1 (D-)
|
Always
|
Below 1 Ω
|
K24-3 (D2-) - z3-1 (D2-)
|
Always
|
Below 1 Ω
|
K24-4 (D2+) - z3-2 (D2+)
|
Always
|
Below 1 Ω
|
(4) After setting the spiral cable sub-assembly to the center position, rotate the spiral cable sub-assembly 2.5 times clockwise. Then while rotating the spiral cable sub-assembly 5 times counterclockwise, measure the resistance according to the value(s) in the table below.
Standard Resistance:
Tester Connection
|
Condition
|
Specified Condition
|
K22-1 (SDN) - z4-4 (SDN)
|
Always
|
3 Ω or less
|
K22-2 (ECC) - z4-3 (ECC)
|
Always
|
3 Ω or less
|
K22-2 (ECC) - z1-12 (ECC)
|
Always
|
3 Ω or less
|
K22-4 (EAU) - z1-10 (EAU)
|
Always
|
3 Ω or less
|
K22-5 (AU2) - z1-9 (AU2)
|
Always
|
3 Ω or less
|
K22-6 (DIST) - z1-8 (DIST)
|
Always
|
3 Ω or less
|
K22-7 (HO) - A (HO)
|
Always
|
3 Ω or less
|
K22-8 (SUP) - z4-2 (SUP)
|
Always
|
3 Ω or less
|
K22-9 (IL-2) - z1-6 (IL-2)
|
Always
|
3 Ω or less
|
K22-10 (+DP2) - z1-5 (+DP2)
|
Always
|
3 Ω or less
|
K22-11 (+DP) - z1-4 (+DP)
|
Always
|
3 Ω or less
|
K22-12 (AU1) - z1-3 (AU1)
|
Always
|
3 Ω or less
|
K22-13 (CCS) - z1-2 (CCS)
|
Always
|
3 Ω or less
|
K22-14 (IL+2) - z1-1 (IL+2)
|
Always
|
3 Ω or less
|
K24-1 (D+) - z2-2 (D+)
|
Always
|
Below 1 Ω
|
K24-2 (D-) - z2-1 (D-)
|
Always
|
Below 1 Ω
|
K24-3 (D2-) - z3-1 (D2-)
|
Always
|
Below 1 Ω
|
K24-4 (D2+) - z3-2 (D2+)
|
Always
|
Below 1 Ω
|
If the result is not as specified, replace the spiral cable sub-assembly.
|