| Last Modified: 11-20-2023 | 6.11:8.1.0 | Doc ID: RM10000000161MW |
| Model Year Start: 2018 | Model: Camry HV | Prod Date Range: [07/2017 - ] |
| Title: NAVIGATION / MULTI INFO DISPLAY: NAVIGATION SYSTEM: Voice Guidance Circuit between Radio Receiver and Stereo Component Amplifier; 2018 - 2024 MY Camry HV [07/2017 - ] | ||
|
Voice Guidance Circuit between Radio Receiver and Stereo Component Amplifier |
DESCRIPTION
Using this circuit, the radio and display receiver assembly sends signals to the stereo component amplifier assembly.
WIRING DIAGRAM
PROCEDURE
|
1. |
CHECK HARNESS AND CONNECTOR (RADIO AND DISPLAY RECEIVER ASSEMBLY - STEREO COMPONENT AMPLIFIER ASSEMBLY) |
(a) Disconnect the K4 radio and display receiver assembly connector.
(b) Disconnect the K9 stereo component amplifier assembly connector.
(c) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
|
Tester connection |
Condition |
Specified condition |
|---|---|---|
|
K4-3 (RL+) - K9-15 (II1+) |
Always |
Below 1 Ω |
|
K4-8 (RL-) - K9-14 (II1-) |
Always |
Below 1 Ω |
|
K9-18 (SLD1) - Body ground |
Always |
10 kΩ or higher |
|
K4-3 (RL+) or K9-15 (II1+) - Body ground |
Always |
10 kΩ or higher |
|
K4-8 (RL-) or K9-14 (II1-) - Body ground |
Always |
10 kΩ or higher |
| OK |
|
PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE
|
![2018 MY Camry HV [07/2017 - 09/2018]; NAVIGATION / MULTI INFO DISPLAY: NAVIGATION SYSTEM: PROBLEM SYMPTOMS TABLE](/t3Portal/stylegraphics/info.gif)
| NG |
|
REPAIR OR REPLACE HARNESS OR CONNECTOR |
|
|