| Last Modified: 11-20-2023 | 6.11:8.1.0 | Doc ID: RM10000000161LM |
| Model Year Start: 2018 | Model: Camry HV | Prod Date Range: [07/2017 - ] |
| Title: NAVIGATION / MULTI INFO DISPLAY: NAVIGATION SYSTEM: Sound Quality is Bad Only when CD is Played (Volume is Too Low); 2018 - 2024 MY Camry HV [07/2017 - ] | ||
|
Sound Quality is Bad Only when CD is Played (Volume is Too Low) |
CAUTION / NOTICE / HINT
NOTICE:
-
Depending on the parts that are replaced during vehicle inspection or maintenance, performing initialization, registration or calibration may be needed. Refer to Precaution for Navigation System.
Click here
![2018 - 2020 MY Camry HV [07/2017 - 10/2020]; NAVIGATION / MULTI INFO DISPLAY: NAVIGATION SYSTEM: PRECAUTION](/t3Portal/stylegraphics/info.gif)
-
When replacing the radio and display receiver assembly, always replace it with a new one. If a radio and display receiver assembly which was installed to another vehicle is used, the following may occur:
- A communication malfunction DTC may be stored.
- The radio and display receiver assembly may not operate normally.
PROCEDURE
|
1. |
REPLACE CD AND RECHECK |
(a) Replace the CD with a new or known good one and check that the malfunction disappears.
OK:
Malfunction disappears.
| OK |
|
END |
|
|
2. |
CHECK NOISE CONDITION |
(a) Check that noise is output from the speakers when a disc is inserted and is being read.
OK:
Noise is output.
| OK |
|
REPLACE STEREO COMPONENT AMPLIFIER ASSEMBLY
|
| NG |
|
REPLACE RADIO AND DISPLAY RECEIVER ASSEMBLY
|
|
|