Last Modified: 11-20-2023 6.11:8.1.0 Doc ID: RM1000000015P1A
Model Year Start: 2018 Model: Camry HV Prod Date Range: [07/2017 -           ]
Title: PARKING BRAKE: FORCED RELEASE: OPERATION METHOD; 2018 - 2024 MY Camry HV [07/2017 -        ]

OPERATION METHOD

PROCEDURE

1. PRECAUTION

Click here 2018 - 2024 MY Camry HV [07/2017 -        ]; PARKING BRAKE: PARKING BRAKE SYSTEM: PRECAUTION

2. REMOVE REAR SEAT CUSHION ASSEMBLY

Click here 2018 - 2020 MY Camry HV [07/2017 - 10/2020]; SEAT: REAR SEAT ASSEMBLY: REMOVAL+ 2021 - 2024 MY Camry HV [10/2020 -        ]; SEAT: REAR SEAT ASSEMBLY: REMOVAL+

3. REMOVE REAR SEAT CUSHION LOCK HOOK

Click here 2018 - 2020 MY Camry HV [07/2017 - 10/2020]; SEAT: REAR SEAT ASSEMBLY: REMOVAL+ 2021 - 2024 MY Camry HV [10/2020 -        ]; SEAT: REAR SEAT ASSEMBLY: REMOVAL+

4. REMOVE LUGGAGE TRIM SERVICE HOLE COVER

Click here 2018 MY Camry HV [07/2017 - 09/2018]; MAINTENANCE: AUXILIARY BATTERY: REMOVAL+ 2019 MY Camry HV [09/2018 - 09/2019]; MAINTENANCE: AUXILIARY BATTERY: REMOVAL+ 2020 MY Camry HV [09/2019 - 10/2020]; MAINTENANCE: AUXILIARY BATTERY: REMOVAL+ 2021 - 2024 MY Camry HV [10/2020 -        ]; MAINTENANCE: AUXILIARY BATTERY: REMOVAL+

5. PARKING BRAKE FORCED RELEASE

CAUTION:

Work on a level surface to ensure safety.

NOTICE:

  • To release the parking brake, follow the procedure for when using SST.
  • If the parking brake cannot be released, follow the procedure for when not using SST.
  • When moving the vehicle after releasing the parking brake, install all parts and do not connect the 2 connectors shown in the illustration.
  • If the power switch is turned on (IG) or on (READY) with the 2 connectors disconnected, a DTC may be stored. Clear any DTCs after performing work.

    Click here 2018 - 2020 MY Camry HV [07/2017 - 10/2020]; PARKING BRAKE: ELECTRIC PARKING BRAKE SYSTEM: DTC CHECK / CLEAR 2021 - 2024 MY Camry HV [10/2020 -        ]; PARKING BRAKE: ELECTRIC PARKING BRAKE SYSTEM: DTC CHECK / CLEAR

(a) When using SST:

(1) Park the vehicle on a level surface and move the shift lever to P.

(2) Turn the power switch off and chock the wheels.

(3) Disconnect the 2 connectors shown in the illustration.

HINT:

If it is difficult to see the 2 connectors shown in the illustration, tilt the rear seatback assembly.

(4) Connect SST (09756-48020) to SST (09756-48070).

SST: 09756-48020

SST: 09756-48070

*a

Brake Pedal

*b

Auxiliary Battery

*c

SST (09756-48020)

*d

SST (09756-48070)

*e

Release Button

*f

Finished Light

Connector

-

-

(5) Connect SST (09756-48070) to the 2 connectors inside of the vehicle.

(6) Connect SST (09756-48020) to the auxiliary battery from the outside of the vehicle.

(7) Push the release button on SST (09756-48020) with the brake pedal depressed.

CAUTION:

The vehicle may suddenly move when the parking brake is released. Make sure to perform the release operation with the brake pedal depressed.

HINT:

  • Confirm that the parking brake is operating by listening for operation sounds.
  • If no operation sounds are heard, push the release button on SST (09756-48020) with the brake pedal depressed.
  • The parking brake may not release if the auxiliary battery voltage is too low. In this case, perform the release operation again using a fully charged or new auxiliary battery.

(8) When the finished light of SST (09756-48020) illuminates, release the brake pedal.

(9) Move the vehicle forward and rearward to check that the parking brake is released.

CAUTION:

Be careful when performing this operation. The vehicle may suddenly move.

NOTICE:

  • When moving the vehicle after releasing the parking brake, check that the 2 connectors are disconnected.
  • The brake warning light (yellow) will illuminate when the vehicle is moved after releasing the parking brake.

(b) When not using SST:

NOTICE:

Perform the following procedure only when the parking brake cannot be released using SST.

HINT:

  • Use the same procedure for the RH side and LH side.
  • The following procedure is for the LH side.

(1) Park the vehicle on a level surface and check that the shift lever is in P.

(2) Turn the power switch off and check that the wheels are chocked.

(3) Check that the 2 connectors shown in the illustration have been disconnected.

(4) Remove the rear wheel.

Click here 2018 - 2024 MY Camry HV [07/2017 -        ]; MAINTENANCE: TIRE AND WHEEL: REMOVAL+

CAUTION:

When using a jack to lift the vehicle, make sure to support the vehicle using safety stands. Do not work on the vehicle with it supported only by a jack.

Click here 2018 - 2024 MY Camry HV [07/2017 -        ]; INTRODUCTION: REPAIR INSTRUCTION: VEHICLE LIFT AND SUPPORT LOCATIONS

(5) Disconnect the No. 2 parking brake wire assembly connector from the parking brake actuator assembly.

Click here 2018 - 2024 MY Camry HV [07/2017 -        ]; PARKING BRAKE: ELECTRIC PARKING BRAKE ACTUATOR: REMOVAL+

(6) Remove the parking brake actuator assembly from the rear disc brake cylinder assembly.

Click here 2018 - 2024 MY Camry HV [07/2017 -        ]; PARKING BRAKE: ELECTRIC PARKING BRAKE ACTUATOR: REMOVAL+

(7) Insert an L-shaped T45 "TORX" wrench into the rear disc brake cylinder assembly.

(8) Turn the L-shaped T45 "TORX" wrench 2 full rotations clockwise to release the parking brake lock.

NOTICE:

  • When moving the vehicle after releasing the parking brake, install all parts and do not connect the 2 connectors shown in the illustration.
  • The brake warning light (yellow) will illuminate when the vehicle is moved after releasing the parking brake.

6. INSTALL LUGGAGE TRIM SERVICE HOLE COVER

Click here 2018 - 2019 MY Camry HV [07/2017 - 09/2019]; MAINTENANCE: AUXILIARY BATTERY: INSTALLATION+ 2020 - 2024 MY Camry HV [09/2019 -        ]; MAINTENANCE: AUXILIARY BATTERY: INSTALLATION+

7. INSTALL REAR SEAT CUSHION LOCK HOOK

Click here 2018 - 2024 MY Camry HV [07/2017 -        ]; SEAT: REAR SEAT ASSEMBLY: INSTALLATION+

8. INSTALL REAR SEAT CUSHION ASSEMBLY

Click here 2018 - 2024 MY Camry HV [07/2017 -        ]; SEAT: REAR SEAT ASSEMBLY: INSTALLATION+