Last Modified: 11-20-2023 |
6.11:8.1.0 |
Doc ID: RM1000000015J76 |
Model Year Start: 2018 |
Model: Camry HV |
Prod Date Range: [07/2017 - 09/2019] |
Title: TELEMATICS: TELEMATICS SYSTEM: Remote Service Malfunction; 2018 - 2019 MY Camry HV [07/2017 - 09/2019] |
Remote Service Malfunction
|
PROCEDURE
1.
|
CHECK CAN COMMUNICATION SYSTEM
|
(a) Connect the Techstream to the DLC3.
(b) Turn the power switch on (IG).
(c) Turn the Techstream on.
(d) Enter the following menus: Bus Check.
Click here
(e) Check that all ECUs and sensors that use CAN communication are connected.
Result
|
Proceed to
|
There are no connection problems.
|
A
|
There is a connection problem.
|
B
|
A
|
|
|
(a) Connect the Techstream to the DLC3.
(b) Turn the power switch on(IG).
(c) Turn the Techstream on.
(d) Enter the following menus: Health Check.
(e) Check for DTCs.
Result
|
Proceed to
|
DTCs are not output.
|
A
|
DTCs are output.
|
B
|
B |
|
INSPECT EACH ECU SYSTEM
|
A
|
|
|
3.
|
CHECK OPERATION OF EACH SYSTEM
|
(a) Check that each system related to Toyota Entune Remote Connect operates normally.
(1) Check power door lock control system
Click here
(2) Check smart key system (for Entry Function)
Click here
(3) Check smart key system (for Start Function)
Click here
(4) Check theft deterrent system
Click here
(5) Check lighting system (INT)
Click here
(6) Check meter/gauge system
Click here
(7) Check air conditioning system (for Automatic Air Conditioning System)
Click here
(8) Check power window control system
Click here
(9) Check sliding roof system
Click here
(10) Check lighting system (EXT)
Click here
Result
|
Proceed to
|
All of the systems related to Toyota Entune Remote Connect operate normally.
|
A
|
Any system related to Toyota Entune Remote Connect does not operate normally.
|
B
|
B |
|
GO TO ABNORMAL SYSTEM
|
A
|
|
|
4.
|
CHECK DCM OPERATION HISTORY
|
(a) Check DCM Operation History.
Body Electrical > Telematics > Utility
Tester Display
|
DCM Operation History
|
NEXT |
|
CONTACT SERVICE CENTER
|
|