(1) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
Tester Connection
|
Condition
|
Specified Condition
|
1 (SDN) - 2 (ECC)
|
"-" (Down shift) shift paddle switch operated and held
|
Below 2.5 Ω
|
"-" (Down shift) shift paddle switch not operated
|
1 MΩ or higher
|
1 (SDN) - 3 (ECC1)
|
"-" (Down shift) shift paddle switch operated and held
|
Below 2.5 Ω
|
"-" (Down shift) shift paddle switch not operated
|
1 MΩ or higher
|
If the result is not as specified, replace the shift paddle switch LH (transmission shift switch assembly).
|
|
*a
|
Component without harness connected
(Shift Paddle Switch LH (Transmission Shift Switch Assembly))
|
|
|