Last Modified: 11-20-2023 6.11:8.1.0 Doc ID: RM1000000015F6D
Model Year Start: 2018 Model: Camry HV Prod Date Range: [07/2017 -           ]
Title: P710 (HYBRID TRANSMISSION / TRANSAXLE): MOTOR CABLE: INSTALLATION; 2018 - 2024 MY Camry HV [07/2017 -        ]

INSTALLATION

PROCEDURE

1. INSTALL MOTOR CABLE

CAUTION:

Be sure to wear insulated gloves.

(a) Using an insulated tool, install the motor cable to the hybrid vehicle transaxle assembly with the 6 bolts.

Torque:

10 N·m {102 kgf·cm, 7 ft·lbf}

NOTICE:

  • Keep the motor cable terminals and their installation area free from foreign matter, water, etc.
  • Do not touch the waterproof seal or terminals of the motor cable.

(b) Engage the 2 claws to install a new terminal cap to the hybrid vehicle transaxle assembly.

NOTICE:

  • Keep the terminal cap and its installation area free from foreign matter, water, etc.
  • Do not pinch the O-ring.
  • Check that the terminal cap is securely installed.

(c) Temporarily install the connector cover to the hybrid vehicle transaxle assembly with the 2 bolts.

(d) Tighten the 2 bolts to install the connector cover.

Torque:

10 N·m {102 kgf·cm, 7 ft·lbf}

2. INSTALL INVERTER WITH CONVERTER ASSEMBLY

Click here 2018 - 2024 MY Camry HV [07/2017 -        ]; HYBRID / BATTERY CONTROL: INVERTER WITH CONVERTER: INSTALLATION