A25A-FXS (ENGINE CONTROL): SFI SYSTEM: PRECAUTION; 2018 - 2020 MY Camry HV [07/2017 - 10/2020]

Last Modified: 11-20-2023	6.11:8.1.0	Doc ID: RM1000000015EYC
Model Year Start: 2018	Model: Camry HV	Prod Date Range: [07/2017 - 10/2020]
Title: A25A-FXS (ENGINE CONTROL): SFI SYSTEM: PRECAUTION; 2018 - 2020 MY Camry HV [07/2017 - 10/2020]

PRECAUTION

WHEN USING TECHSTREAM

CAUTION:

Observe the following items for safety reasons:

Before using the Techstream, read the instruction manual.
Prevent the Techstream cable from being caught on the pedals, shift lever or steering wheel when driving with the Techstream connected to the vehicle.
When driving the vehicle for testing purposes using the Techstream, 2 persons are required. One to drive the vehicle, and another to operate the Techstream.

INITIALIZATION

NOTICE:

Perform Registration (VIN registration) after replacing the ECM.
Click here
Perform Learning Value Reset and Idle Learning after replacing or servicing parts related to engine operation.
Click here
Perform "Grille Shutter Control Mode Switching and Grille Shutter Initialization" after replacing the swing grille actuator assembly or radiator shutter sub-assembly.
Click here

When the cable is disconnected from the negative (-) auxiliary battery terminal, initialize the following system(s) after the cable is reconnected.

System Name	See Procedure
Lane Departure Alert System (w/ Steering Control)
Intelligent Clearance Sonar System
Parking Assist Monitor System
Panoramic View Monitor System
Pre-collision System
Lighting System (w/ AFS) (EXT)

PRECAUTIONS FOR INSPECTING HYBRID CONTROL SYSTEM

(a) Refer to Hybrid Control System.

for Nickel Metal Hydride Battery:

Click here

for Lithium-ion Battery:

Click here

NOTICE FOR HYBRID CONTROL SYSTEM ACTIVATION

(a) Refer to Hybrid Control System.

for Nickel Metal Hydride Battery:

Click here

for Lithium-ion Battery:

Click here

PRECAUTION WHEN REPLACING BATTERY ECU ASSEMBLY AND ECM (for Lithium-ion Battery)

(a) Refer to Hybrid Control System.

Click here