A25A-FXS (LUBRICATION): OIL PRESSURE SENSOR: INSTALLATION; 2018 - 2019 MY Camry HV [07/2017

Last Modified: 11-20-2023	6.11:8.1.0	Doc ID: RM1000000015EVY
Model Year Start: 2018	Model: Camry HV	Prod Date Range: [07/2017 - 09/2019]
Title: A25A-FXS (LUBRICATION): OIL PRESSURE SENSOR: INSTALLATION; 2018 - 2019 MY Camry HV [07/2017 - 09/2019]

INSTALLATION

1. INSTALL OIL PRESSURE SENSOR (OIL PRESSURE SENDER GAUGE ASSEMBLY)

(a) Apply adhesive to 2 or 3 threads of the oil pressure sensor (oil pressure sender gauge assembly).

Adhesive:

Toyota Genuine Adhesive 1344, Three Bond 1344 or equivalent

NOTICE:

Do not apply adhesive to the oil inlet port of the oil pressure sensor (oil pressure sender gauge assembly).
Install the oil pressure sensor (oil pressure sender gauge assembly) within 3 minutes of applying adhesive.

*a	Adhesive 1344
*b	Oil Inlet Port

(b) Using a 27 mm deep socket wrench, install the oil pressure sensor (oil pressure sender gauge assembly) to the cylinder block sub-assembly.

Torque:

15 N·m {153 kgf·cm, 11 ft·lbf}

2. INSPECT FOR ENGINE OIL LEAK

Click here

3. INSTALL NO. 2 ENGINE UNDER COVER ASSEMBLY

Click here

4. INSTALL NO. 1 ENGINE UNDER COVER

Click here

5. INSTALL FRONT WHEEL OPENING EXTENSION PAD LH

Click here

6. INSTALL FRONT WHEEL OPENING EXTENSION PAD RH

Click here