- Unset or Set is not displayed correctly on the Techstream according to the front passenger seat belt condition
- NG is displayed on the Techstream
| Last Modified: 11-20-2023 | 6.11:8.1.0 | Doc ID: RM1000000015CO7 |
| Model Year Start: 2018 | Model: Camry HV | Prod Date Range: [07/2017 - ] |
| Title: SEAT BELT: SEAT BELT WARNING SYSTEM: Front Passenger Side Seat Belt Warning Light does not Operate; 2018 - 2024 MY Camry HV [07/2017 - ] | ||
|
Front Passenger Side Seat Belt Warning Light does not Operate |
DESCRIPTION
When the power switch is turned on (IG), the occupant detection ECU sends signals to the airbag sensor assembly to indicate the state of the front seat inner belt assembly RH and also whether the front passenger seat is occupied. The airbag sensor assembly sends those signals to the combination meter assembly via CAN communication. The seat belt warning light on the combination meter assembly illuminates, blinks or turns off in accordance with these signals.
WIRING DIAGRAM
CAUTION / NOTICE / HINT
NOTICE:
The seat belt warning system uses the CAN communication system. First, confirm that there are no malfunctions in the CAN communication system. Refer to How to Proceed with Troubleshooting.
Click here
![2018 - 2024 MY Camry HV [07/2017 - ]; SEAT BELT: SEAT BELT WARNING SYSTEM: HOW TO PROCEED WITH TROUBLESHOOTING](/t3Portal/stylegraphics/info.gif)
HINT:
The seat belt warning light on the combination meter assembly is used for both the driver seat and front passenger seat. Check that the operation of the seat belt warning light is normal first.
Click here
If the seat belt warning light does not operate for both the driver seat and front passenger seat, replace the combination meter.
Click here
PROCEDURE
|
1. |
CHECK DTC OUTPUT (OCCUPANT CLASSIFICATION SYSTEM) |
(a) Clear the DTCs.
Body Electrical > Occupant Detection > Clear DTCs
(b) Check for DTCs.
Body Electrical > Occupant Detection > Trouble Codes
|
Result |
Proceed to |
|---|---|
|
DTCs are not output |
A |
|
DTCs are output |
B |
| B |
|
GO TO OCCUPANT CLASSIFICATION SYSTEM
|
|
|
2. |
CHECK DTC OUTPUT (AIRBAG SYSTEM) |
(a) Clear the DTCs.
Body Electrical > SRS Airbag > Clear DTCs
(b) Check for DTCs.
Body Electrical > SRS Airbag > Trouble Codes
|
Result |
Proceed to |
|---|---|
|
DTCs are not output |
A |
|
DTCs are output |
B |
| B |
|
GO TO AIRBAG SYSTEM
|
|
|
3. |
READ VALUE USING TECHSTREAM |
(a) Connect the Techstream to the DLC3.
(b) Turn the power switch on (IG).
(c) Turn the Techstream on.
(d) Enter the following menus: Body Electrical / Occupant Detection / Data List.
(e) Read the Data List according to the display on the Techstream.
Body Electrical > Occupant Detection > Data List
|
Tester Display |
Measurement Item |
Range |
Normal Condition |
Diagnostic Note |
|---|---|---|---|---|
|
Passenger Buckle SW |
Front passenger buckle switch |
Unset, Set or NG |
Unset: Seat belt not fastened Set: Seat belt fastened NG: Data is not determined |
- |
Body Electrical > Occupant Detection > Data List
|
Tester Display |
|---|
|
Passenger Buckle SW |
|
Result |
Proceed to |
|---|---|
|
Unset or Set is displayed on the Techstream according to the front passenger seat belt condition |
A |
|
Unset or Set is not displayed correctly on the Techstream according to the front passenger seat belt condition |
B |
|
NG is displayed on the Techstream |
C |
| B |
|
REPLACE FRONT SEAT INNER BELT ASSEMBLY RH
|
| C |
|
REPLACE OCCUPANT DETECTION ECU
|
|
|
4. |
READ VALUE USING TECHSTREAM |
(a) Connect the Techstream to the DLC3.
(b) Turn the power switch on (IG).
(c) Turn the Techstream on.
(d) Enter the following menus: Body Electrical / SRS Airbag / Data List.
(e) Read the Data List according to the display on the Techstream.
Body Electrical > SRS Airbag > Data List
|
Tester Display |
Measurement Item |
Range |
Normal Condition |
Diagnostic Note |
|---|---|---|---|---|
|
Right side Buckle SW |
RH buckle switch |
Unset, Set or NG |
Unset: Seat belt not fastened Set: Seat belt fastened NG: Data is not determined |
- |
Body Electrical > SRS Airbag > Data List
|
Tester Display |
|---|
|
Right side Buckle SW |
|
Result |
Proceed to |
|---|---|
|
Unset or Set is displayed on the Techstream according to the front passenger seat belt condition |
A |
|
|
B |
| A |
|
USE SIMULATION METHOD TO CHECK
|
| B |
|
REPLACE AIR BAG SENSOR ASSEMBLY
|
|
|