| Last Modified: 11-20-2023 | 6.11:8.1.0 | Doc ID: RM1000000015CO6 |
| Model Year Start: 2018 | Model: Camry HV | Prod Date Range: [07/2017 - ] |
| Title: SEAT BELT: SEAT BELT WARNING SYSTEM: Driver Side Seat Belt Warning Light does not Operate; 2018 - 2024 MY Camry HV [07/2017 - ] | ||
|
Driver Side Seat Belt Warning Light does not Operate |
DESCRIPTION
The seat belt warning light on the combination meter assembly illuminates, blinks or turns off in accordance with the state of the front seat inner belt assembly LH.
WIRING DIAGRAM
CAUTION / NOTICE / HINT
NOTICE:
The seat belt warning system uses the CAN communication system. First, confirm that there are no malfunctions in the CAN communication system. Refer to How to Proceed with Troubleshooting.
Click here
![2018 - 2024 MY Camry HV [07/2017 - ]; SEAT BELT: SEAT BELT WARNING SYSTEM: HOW TO PROCEED WITH TROUBLESHOOTING](/t3Portal/stylegraphics/info.gif)
HINT:
The seat belt warning light on the combination meter assembly is used for both the driver seat and front passenger seat. Check that the operation of the seat belt warning light is normal first.
Click here
If the seat belt warning light does not operate for both the driver seat and front passenger seat, replace the combination meter assembly.
Click here
PROCEDURE
|
1. |
CHECK DTC OUTPUT (AIRBAG SYSTEM) |
(a) Clear the DTCs.
Body Electrical > SRS Airbag > Clear DTCs
(b) Check for DTCs.
Body Electrical > SRS Airbag > Trouble Codes
|
Result |
Proceed to |
|---|---|
|
DTCs are not output |
A |
|
DTCs are output |
B |
| B |
|
GO TO AIRBAG SYSTEM
|
|
|
2. |
READ VALUE USING TECHSTREAM |
(a) Connect the Techstream to the DLC3.
(b) Turn the power switch on (IG).
(c) Turn the Techstream on.
(d) Enter the following menus: Body Electrical / SRS Airbag / Data List.
(e) Read the Data List according to the display on the Techstream.
Body Electrical > SRS Airbag > Data List
|
Tester Display |
Measurement Item |
Range |
Normal Condition |
Diagnostic Note |
|---|---|---|---|---|
|
Left side Buckle SW |
LH buckle switch |
Unset, Set or NG |
Unset: Seat belt not fastened Set: Seat belt fastened NG: Data is not determined |
- |
Body Electrical > SRS Airbag > Data List
|
Tester Display |
|---|
|
Left side Buckle SW |
|
Result |
Proceed to |
|---|---|
|
Unset or Set is displayed on the Techstream according to the driver seat belt condition |
A |
|
Unset or Set is not displayed correctly on the Techstream according to the driver seat belt condition |
B |
|
NG is displayed on the Techstream |
C |
| A |
|
USE SIMULATION METHOD TO CHECK
|
| B |
|
REPLACE FRONT SEAT INNER BELT ASSEMBLY LH
|
| C |
|
REPLACE AIR BAG SENSOR ASSEMBLY
|
|
|