Last Modified: 11-20-2023 6.11:8.1.0 Doc ID: RM1000000015CO1
Model Year Start: 2018 Model: Camry HV Prod Date Range: [07/2017 -           ]
Title: SEAT BELT: SEAT BELT WARNING SYSTEM: CUSTOMIZE PARAMETERS; 2018 - 2024 MY Camry HV [07/2017 -        ]

CUSTOMIZE PARAMETERS

CUSTOMIZE SEAT BELT WARNING SYSTEM

HINT:

The following items can be customized.

NOTICE:

  • When the customer requests a change in a function, first make sure that the function can be customized.
  • Be sure to make a note of the current settings before customizing.
  • When troubleshooting a function, first make sure that the function is set to the default setting.
  • These buzzers should be on for safe driving. Perform this procedure only if it is necessary to set the buzzer to off (disabled).

(a) Customizing with the Techstream

(1) Connect the Techstream to the DLC3.

(2) Turn the power switch on (IG).

(3) Turn the Techstream on.

(4) Enter the following menus: Customize Setting / Warning.

(5) Select the setting by referring to the table below.

Warning

Tester Display

Description

Default

Setting

ECU

Driver Seatbelt Warning Buzzer Function

Enables sounding of the driver seat belt warning buzzer

ON

$00:OFF,$01:ON

Combination meter assembly

Passenger Seatbelt Warning Buzzer Function

Enables sounding of the front passenger seat belt warning buzzer

ON

$00:OFF,$01:ON

Combination meter assembly

Rear Right Seatbelt Warning Buzzer Function

Function to sound the rear RH seat belt warning buzzer

ON

$00:OFF,$01:ON

Combination meter assembly

Rear Left Seatbelt Warning Buzzer Function

Function to sound the rear LH seat belt warning buzzer

ON

$00:OFF,$01:ON

Combination meter assembly

Rear Center Seatbelt Warning Buzzer Function

Function to sound the rear center seat belt warning buzzer

ON

$00:OFF,$01:ON

Combination meter assembly

HINT:

These settings are only valid when the vehicle is driven at approximately 20 km/h (12 mph) or more.