| Last Modified: 11-20-2023 | 6.11:8.1.0 | Doc ID: RM1000000015C1H |
| Model Year Start: 2018 | Model: Camry HV | Prod Date Range: [07/2017 - 08/2022] |
| Title: SUPPLEMENTAL RESTRAINT SYSTEMS: AIRBAG SYSTEM: B1630,B1632; Curtain Shield Airbag Sensor (RH); 2018 - 2022 MY Camry HV [07/2017 - 08/2022] | ||
|
DTC |
B1630 |
Curtain Shield Airbag Sensor (RH) |
|
DTC |
B1632 |
Curtain Shield Airbag Sensor Lost Communication (RH) |
DESCRIPTION
The side collision sensor RH circuit (bus 1) consists of the airbag sensor assembly, door side airbag sensor RH and side No. 2 airbag sensor RH.
The door side airbag sensor RH and side No. 2 airbag sensor RH detect impacts to the vehicle and send signals to the airbag sensor assembly to determine if the airbags and pretensioners should be deployed.
These DTCs are stored when a malfunction is detected in the side No. 2 airbag sensor RH.
|
DTC No. |
Detection Item |
DTC Detection Condition |
Trouble Area |
Warning Indicate |
Test Mode / Check Mode |
|---|---|---|---|---|---|
|
B1630 |
Curtain Shield Airbag Sensor (RH) |
|
|
Comes on |
Does not apply to test/check mode |
|
B1632 |
Curtain Shield Airbag Sensor Lost Communication (RH) |
|
|
Comes on |
Does not apply to test/check mode |
WIRING DIAGRAM
Click here
![2018 - 2022 MY Camry HV [07/2017 - 08/2022]; SUPPLEMENTAL RESTRAINT SYSTEMS: AIRBAG SYSTEM: B1633; Curtain Shield Airbag Sensor Initialization Error (RH)+](/t3Portal/stylegraphics/info.gif)
CAUTION / NOTICE / HINT
NOTICE:
After turning the power switch off, waiting time may be required before disconnecting the cable from the negative (-) auxiliary battery terminal. Therefore, make sure to read the disconnecting the cable from the negative (-) auxiliary battery terminal notices before proceeding with work.
Click here
PROCEDURE
|
1. |
CHECK SIDE NO. 2 AIRBAG SENSOR RH |
|
(a) Turn the power switch off. |
|
(b) Disconnect the cable from the negative (-) auxiliary battery terminal.
CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) auxiliary battery terminal to disable the SRS system.
(c) Interchange the side No. 2 airbag sensor RH with LH and connect the connectors.
(d) Connect the cable to the negative (-) auxiliary battery terminal.
(e) Turn the power switch on (IG), and wait for at least 60 seconds.
(f) Clear the DTCs stored in memory.
Body Electrical > SRS Airbag > Clear DTCs
(g) Turn the power switch off.
(h) Turn the power switch on (IG), and wait for at least 60 seconds.
(i) Check for DTCs.
Body Electrical > SRS Airbag > Trouble Codes
HINT:
Codes other than DTCs B1630, B1632, B1635 and B1637 may be output at this time, but they are not related to this check.
|
Result |
Proceed to |
|---|---|
|
DTC B1630 or B1632 is output. |
A |
|
DTC B1635 or B1637 is output. |
B |
|
DTCs B1630, B1632, B1635 and B1637 are not output. |
C |
(j) Turn the power switch off.
(k) Disconnect the cable from the negative (-) auxiliary battery terminal.
CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) auxiliary battery terminal to disable the SRS system.
(l) Return the side No. 2 airbag sensor RH and LH to their original positions and connect the connectors.
| A |
|
REPLACE AIRBAG SENSOR ASSEMBLY
|
| B |
|
REPLACE SIDE NO. 2 AIRBAG SENSOR RH
|
| C |
|
USE SIMULATION METHOD TO CHECK
|
|
|