Last Modified: 11-20-2023 6.11:8.1.0 Doc ID: RM1000000015C0P
Model Year Start: 2018 Model: Camry HV Prod Date Range: [07/2017 -           ]
Title: SUPPLEMENTAL RESTRAINT SYSTEMS: AIRBAG SYSTEM: CHECK MODE PROCEDURE; 2018 - 2024 MY Camry HV [07/2017 -        ]

CHECK MODE PROCEDURE

CHECK MODE (SIGNAL CHECK): DTC CHECK

(a) Turn the power switch off.

(b) Connect the Techstream to the DLC3.

(c) Turn the power switch on (IG).

(d) Turn the Techstream on.

(e) Enter the following menus: Body Electrical / SRS Airbag / Utility / Signal Check.

Body Electrical > SRS Airbag > Utility

Tester Display

Signal Check

NOTICE:

Select Signal Check on the Techstream to clear the DTCs (both current and history).

HINT:

  • DTCs can be detected more sensitively in check mode than in normal diagnosis mode.
  • Perform check mode inspection when a malfunction in a squib circuit is suspected even after the normal system code is output through normal diagnosis mode inspection.