PARK ASSIST / MONITORING: PARKING ASSIST MONITOR SYSTEM: U0100,U0126,U0129,U0140,U0163,U0233,U1110; Lost Communication with ECM / PCM "A"; 2018 - 2020 MY Camry HV [07/2017

Last Modified: 11-20-2023	6.11:8.1.0	Doc ID: RM100000001597H
Model Year Start: 2018	Model: Camry HV	Prod Date Range: [07/2017 - 10/2020]
Title: PARK ASSIST / MONITORING: PARKING ASSIST MONITOR SYSTEM: U0100,U0126,U0129,U0140,U0163,U0233,U1110; Lost Communication with ECM / PCM "A"; 2018 - 2020 MY Camry HV [07/2017 - 10/2020]

DTC

U0100

Lost Communication with ECM / PCM "A"

DTC

U0126

Lost Communication with Steering Angle Sensor Module

DTC

U0129

Lost Communication with Brake System Control Module

DTC

U0140

Lost Communication with Body Control Module

DTC

U0163

Lost Communication with Navigation Control Module

DTC

U0233

Lost Communication with Blind Spot Monitor Master Module

DTC

U1110

Lost Communication with Intuitive Parking Assist Module

DESCRIPTION

These DTCs are stored if there is a malfunction in the CAN communication system connected to the rear television camera assembly.

HINT:

If CAN communication system DTCs are stored, they may also be stored in other systems.

DTC No.	Detection Item	DTC Detection Condition	Trouble Area
U0100	Lost Communication with ECM / PCM "A"	Lost Communication with Hybrid Vehicle Control ECU Assembly	CAN communication system
U0126	Lost Communication with Steering Angle Sensor Module	Lost communication with steering sensor	CAN communication system
U0129	Lost Communication with Brake System Control Module	Lost communication with skid control ECU	CAN communication system
U0140	Lost Communication with Body Control Module	Lost communication with main body ECU (multiplex network body ECU)	CAN communication system
U0163	Lost Communication with Navigation Control Module	Lost communication with radio and display receiver assembly	CAN communication system
U0233	Lost Communication with Blind Spot Monitor Master Module	Lost communication with blind spot monitor sensor RH	CAN communication system
U1110	Lost Communication with Intuitive Parking Assist Module	Lost communication with clearance warning ECU assembly	CAN communication system

1.	CHECK DTC OUTPUT

(a) Clear the DTCs.

(b) Recheck for DTCs and check that no DTCs are output.

HINT:

If CAN communication system DTCs are stored, they may also be stored in other systems.
If the CAN communication system has been inspected and repaired in other systems, the DTCs will not be output when rechecking for DTCs.
If these DTCs are output frequently, duplicate the conditions that cause the problem symptoms and perform troubleshooting again, even though the DTC was not output when rechecking for DTCs.
Click here

Result	Proceed to
DTCs are output	A
No DTCs are output	B

USE SIMULATION METHOD TO CHECK