| Last Modified: 11-20-2023 | 6.11:8.1.0 | Doc ID: RM1000000015978 |
| Model Year Start: 2018 | Model: Camry HV | Prod Date Range: [07/2017 - ] |
| Title: PARK ASSIST / MONITORING: PARKING ASSIST MONITOR SYSTEM: C164D; Wheel Speed Sensor Malfunction; 2018 - 2024 MY Camry HV [07/2017 - ] | ||
|
DTC |
C164D |
Wheel Speed Sensor Malfunction |
DESCRIPTION
This DTC is stored when the rear television camera assembly receives a wheel speed sensor (front speed sensor RH or front speed sensor LH, rear speed sensor RH or rear speed sensor LH) abnormality signal from the electronically controlled brake system via CAN communication.
|
DTC No. |
Detection Item |
DTC Detection Condition |
Trouble Area |
|---|---|---|---|
|
C164D |
Wheel Speed Sensor Malfunction |
Front wheel speed sensor malfunction |
Electronically controlled brake system |
PROCEDURE
|
1. |
CHECK DTC OUTPUT |
(a) Clear the DTCs.
Chassis > Parking Assist Camera > Clear DTCs
(b) Recheck for DTCs and check that no DTCs are output.
Chassis > Parking Assist Camera > Trouble Codes
HINT:
- If the rear television camera assembly cannot read the stored information when activated, allowing the ECU to store the information again may return the system to normal.
- The DTC is stored when a malfunction occurs in the electronically controlled brake system.
- If troubleshooting and repair of the malfunction in the electronically controlled brake system have been completed, DTC C164D will not be output again when rechecking for DTCs.
-
If DTC C164D is stored frequently but is not output when rechecking for DTCs, attempt to reproduce the conditions when the malfunction occurred.
Click here
![2018 MY Camry HV [07/2017 - 09/2018]; INTRODUCTION: HOW TO TROUBLESHOOT ECU CONTROLLED SYSTEMS: HOW TO PROCEED WITH TROUBLESHOOTING](/t3Portal/stylegraphics/info.gif)
|
Result |
Proceed to |
|---|---|
|
DTC C164D is output |
A |
|
DTC C164D is not output |
B |
| A |
|
GO TO ELECTRONICALLY CONTROLLED BRAKE SYSTEM
|
| B |
|
USE SIMULATION METHOD TO CHECK
|
|
|