| Last Modified: 11-20-2023 | 6.11:8.1.0 | Doc ID: RM1000000015974 |
| Model Year Start: 2018 | Model: Camry HV | Prod Date Range: [07/2017 - ] |
| Title: PARK ASSIST / MONITORING: PARKING ASSIST MONITOR SYSTEM: Black Screen; 2018 - 2024 MY Camry HV [07/2017 - ] | ||
|
Black Screen |
DESCRIPTION
The video signal from the rear television camera assembly is transmitted to the radio and display receiver assembly.
WIRING DIAGRAM
CAUTION / NOTICE / HINT
NOTICE:
- Inspect the fuses for circuits related to this system before performing the following procedure.
-
Depending on the parts that are replaced or operations that are performed during vehicle inspection or maintenance, calibration of other systems as well as the parking assist monitor system may be needed.
Click here
![2018 - 2020 MY Camry HV [07/2017 - 10/2020]; PARK ASSIST / MONITORING: PARKING ASSIST MONITOR SYSTEM: CALIBRATION](/t3Portal/stylegraphics/info.gif)
PROCEDURE
|
1. |
CHECK HARNESS AND CONNECTOR (RADIO AND DISPLAY RECEIVER ASSEMBLY - REAR TELEVISION CAMERA ASSEMBLY) |
Click here
| NG |
|
REPAIR OR REPLACE HARNESS OR CONNECTOR |
|
|
2. |
CHECK HARNESS AND CONNECTOR (ACC POWER SUPPLY - GROUND) |
Click here
| NG |
|
REPAIR OR REPLACE HARNESS OR CONNECTOR |
|
|
3. |
INSPECT RADIO AND DISPLAY RECEIVER ASSEMBLY (V-, CGND) |
Click here
| NG |
|
REPLACE RADIO AND DISPLAY RECEIVER ASSEMBLY
|
|
|
4. |
INSPECT RADIO AND DISPLAY RECEIVER ASSEMBLY (V+, GND1) |
Click here
| NG |
|
REPLACE REAR TELEVISION CAMERA ASSEMBLY
|
|
|
5. |
REPLACE RADIO AND DISPLAY RECEIVER ASSEMBLY |
(a) Replace the radio and display receiver assembly with a new or known good one.
Click here
(b) Check that the parking assist monitor system operates normally.
OK:
Parking assist monitor system operates normally.
| OK |
|
END |
| NG |
|
REPLACE REAR TELEVISION CAMERA ASSEMBLY
|
|
|