Last Modified: 11-20-2023 |
6.11:8.1.0 |
Doc ID: RM100000001596S |
Model Year Start: 2018 |
Model: Camry HV |
Prod Date Range: [07/2017 -
] |
Title: PARK ASSIST / MONITORING: PARKING ASSIST MONITOR SYSTEM: INITIALIZATION; 2018 - 2024 MY Camry HV [07/2017 - ] |
INITIALIZATION
INITIALIZE PARKING ASSIST MONITOR SYSTEM
(a) When "!" mark is displayed on the image of the area behind the vehicle, perform the following procedure to correct the steering angle neutral point.
(1) Fully turn the steering wheel to the right and left on flat ground.
NOTICE:
Memorizing the steering angle neutral point must be carried out with the power switch on (READY). Apply the parking brake, depress the brake pedal, check that the shift lever is in P, and ensure that the vehicle is not moving.
HINT:
If "!" mark is displayed on the image of the area behind the vehicle with the steering wheel fully turned to the right or left, perform "Steering Angle Setting in Calibration".
Click here
(b) If the RCD OFF indicator is blinking and "RCD unavailable" is displayed on the screen, perform the following procedure to set the steering angle neutral point.
(1) Fully turn the steering wheel to the right and left on flat ground.
NOTICE:
Memorizing the steering angle neutral point must be carried out with the power switch on (READY). Apply the parking brake, depress the brake pedal, check that the shift lever is in P, and ensure that the vehicle is not moving.
HINT:
If estimated course lines are not displayed on the image of the area behind the vehicle with the steering wheel fully turned to the right or left, perform "Steering Angle Setting in Calibration".
Click here
|