Last Modified: 11-20-2023 |
6.11:8.1.0 |
Doc ID: RM10000000158HG |
Model Year Start: 2018 |
Model: Camry HV |
Prod Date Range: [07/2017 -
] |
Title: SLIDING ROOF / CONVERTIBLE: SLIDING ROOF SYSTEM: B2343; Position Initialization Incomplete; 2018 - 2024 MY Camry HV [07/2017 - ] |
DTC
|
B2343
|
Position Initialization Incomplete
|
DESCRIPTION
This DTC is stored when the sliding roof ECU (sliding roof drive gear sub-assembly) has not been initialized.
DTC No.
|
Detection Item
|
DTC Detection Condition
|
Trouble Area
|
B2343
|
Position Initialization Incomplete
|
Sliding roof ECU (sliding roof drive gear sub-assembly) has not been initialized
|
Sliding roof ECU (Sliding roof drive gear sub-assembly)
|
WIRING DIAGRAM
Refer to DTC B2341.
Click here
CAUTION / NOTICE / HINT
NOTICE:
-
If the sliding roof ECU (sliding roof drive gear sub-assembly) is removed and reinstalled or replaced, the sliding roof ECU (sliding roof drive gear sub-assembly) must be initialized.
Click here
HINT:
When DTC B2342 and B2343 are output simultaneously, perform troubleshooting for DTC B2342 first.
PROCEDURE
1.
|
INITIALIZE SLIDING ROOF ECU (SLIDING ROOF DRIVE GEAR SUB-ASSEMBLY)
|
(a) Check that the sliding roof ECU (sliding roof drive gear sub-assembly) can be initialized.
Click here
OK:
Sliding roof ECU (sliding roof drive gear sub-assembly) can be initialized.
OK
|
|
|
2.
|
CHECK SLIDING ROOF OPERATION
|
(a) Check the sliding roof auto operation.
Click here
OK:
Auto operation operates normally.
OK
|
|
|
(a) Clear the DTCs.
Body Electrical > Sliding Roof > Clear DTCs
(b) Check for DTCs.
Body Electrical > Sliding Roof > Trouble Codes
OK:
DTC B2343 is not output.
OK |
|
END (MALFUNCTION DUE TO INITIALIZATION FAILURE)
|
|