Last Modified: 11-20-2023 6.11:8.1.0 Doc ID: RM10000000157CD
Model Year Start: 2018 Model: Camry HV Prod Date Range: [07/2017 - 09/2019]
Title: LIGHTING (EXT): LIGHTING SYSTEM (w/ AFS): B2412,B2413,B2417,B2418; Headlight Swivel Motor LH; 2018 - 2019 MY Camry HV [07/2017 - 09/2019]

DTC

B2412

Headlight Swivel Motor LH

DTC

B2413

Headlight Swivel Motor RH

DTC

B2417

Headlight Beam Level Control Motor LH

DTC

B2418

Headlight Beam Level Control Motor RH

DESCRIPTION

The headlight ECU sub-assembly LH sends automatic headlight beam level control signals to each headlight swivel and leveling motor via LIN communication.

Each headlight ECU sub-assembly and headlight swivel and leveling motor communicate via LIN communication.

The headlight swivel and leveling motor operates according to power supplied and automatic headlight beam level control signals from its respective headlight ECU sub-assembly and sends its operating state to the headlight ECU sub-assembly.

The headlight ECU sub-assembly LH stores a DTC if it detects that a headlight swivel and leveling motor is malfunctioning.

DTC No.

Detection Item

DTC Detection Condition

Trouble Area

DTC Output from

B2412

Headlight Swivel Motor LH

Detection condition:

  • The power switch is on (IG).

Malfunction status:

  • Headlight swivel and leveling motor LH malfunction detected

Malfunction duration:

  • -

Headlight assembly LH

Headlight ECU sub-assembly LH

B2413

Headlight Swivel Motor RH

Detection condition:

  • The power switch is on (IG).

Malfunction status:

  • Headlight swivel and leveling motor RH malfunction detected

Malfunction duration:

  • -

Headlight assembly RH

Headlight ECU sub-assembly LH

B2417

Headlight Beam Level Control Motor LH

Detection condition:

  • The power switch is on (IG).

Malfunction status:

  • Headlight swivel and leveling motor LH malfunction detected

Malfunction duration:

  • -

Headlight assembly LH

Headlight ECU sub-assembly LH

B2418

Headlight Beam Level Control Motor RH

Detection condition:

  • The power switch is on (IG).

Malfunction status:

  • Headlight swivel and leveling motor RH malfunction detected

Malfunction duration:

  • -

Headlight assembly RH

Headlight ECU sub-assembly LH

WIRING DIAGRAM

CAUTION / NOTICE / HINT

NOTICE:

  • If the headlight ECU sub-assembly LH has been replaced, it is necessary to synchronize the vehicle information and initialize the headlight ECU sub-assembly LH.

    Click here 2018 - 2020 MY Camry HV [07/2017 - 10/2020]; LIGHTING (EXT): LIGHTING SYSTEM (w/ AFS): INITIALIZATION

  • If the headlight assembly LH has been replaced, it is necessary to synchronize the vehicle information and initialize the headlight ECU sub-assembly LH.

    Click here 2018 - 2020 MY Camry HV [07/2017 - 10/2020]; LIGHTING (EXT): LIGHTING SYSTEM (w/ AFS): INITIALIZATION

PROCEDURE

1.

CLEAR DTC

(a) Connect the Techstream to the DLC3.

(b) Turn the power switch on (IG).

(c) Turn the Techstream on.

(d) Enter the following menus: Body Electrical / AFS / Trouble Codes.

(e) Clear the DTCs.

Body Electrical > AFS > Clear DTCs

NEXT

2.

CHECK FOR DTC

(a) Connect the Techstream to the DLC3.

(b) Turn the power switch on (IG).

(c) Turn the Techstream on.

(d) Enter the following menus: Body Electrical / AFS / Trouble Codes.

(e) Check for DTCs.

Body Electrical > AFS > Trouble Codes

OK:

DTC B2412, B2413, B2417 and B2418 are not output.

Result

Proceed to

OK

A

NG (DTC B2412 and B2417 are output)

B

NG (DTC B2413 and B2418 are output)

C

A

USE SIMULATION METHOD TO CHECK 2018 MY Camry HV [07/2017 - 09/2018]; INTRODUCTION: HOW TO TROUBLESHOOT ECU CONTROLLED SYSTEMS: HOW TO PROCEED WITH TROUBLESHOOTING 2019 MY Camry HV [09/2018 - 09/2019]; INTRODUCTION: HOW TO TROUBLESHOOT ECU CONTROLLED SYSTEMS: HOW TO PROCEED WITH TROUBLESHOOTING

B

REPLACE HEADLIGHT ASSEMBLY LH

C

REPLACE HEADLIGHT ASSEMBLY RH