Last Modified: 11-20-2023 |
6.11:8.1.0 |
Doc ID: RM10000000156YT |
Model Year Start: 2018 |
Model: Camry HV |
Prod Date Range: [07/2017 - 09/2019] |
Title: SEAT: LUMBAR SUPPORT ADJUSTER ASSEMBLY: REMOVAL; 2018 - 2019 MY Camry HV [07/2017 - 09/2019] |
REMOVAL
CAUTION / NOTICE / HINT
The necessary procedures (adjustment, calibration, initialization, or registration) that must be performed after parts are removed, installed, or replaced during the lumbar support adjuster assembly removal/installation are shown below.
Necessary Procedure After Parts Removed/Installed/Replaced
Replacement Part or Procedure
|
Necessary Procedures
|
Effects / Inoperative when not performed
|
Link
|
Disconnect cable from negative auxiliary battery terminal
|
Perform steering sensor zero point calibration
|
Lane departure alert system (w/ Steering Control)
|
|
Pre-collision system
|
Intelligent clearance sonar system*
|
Lighting system (w/ AFS)(EXT)
|
Memorize steering angle neutral point
|
Parking assist monitor system
|
|
Panoramic view monitor system
|
|
CAUTION:
-
Be sure to read Precaution thoroughly before servicing.
Click here
-
Wear protective gloves. Sharp areas on the parts may injure your hands.
PROCEDURE
1. REMOVE FRONT SEAT ASSEMBLY LH
Click here
2. DISCONNECT SEPARATE TYPE FRONT SEATBACK COVER
Click here
3. REMOVE FRONT SEAT FRONT CUSHION SHIELD LH
Click here
4. REMOVE FRONT SEAT CUSHION SHIELD LH
Click here
5. REMOVE FRONT SEAT INNER CUSHION SHIELD LH
Click here
6. REMOVE SEPARATE TYPE FRONT SEATBACK ASSEMBLY
Click here
7. REMOVE FRONT SEAT HEADREST SUPPORT
Click here
8. REMOVE SEPARATE TYPE FRONT SEATBACK COVER WITH PAD
Click here
9. REMOVE LUMBAR SUPPORT ADJUSTER ASSEMBLY LH
(a) Disengage the clamp and disconnect the connector.
HINT:
Disengage the clamp first.
|
|
(b) Disengage the 8 hooks to remove the lumbar support adjuster assembly LH.
|
|
|