Last Modified: 11-20-2023 6.11:8.1.0 Doc ID: RM10000000156BI
Model Year Start: 2018 Model: Camry HV Prod Date Range: [07/2017 -           ]
Title: WINDOW / GLASS: POWER WINDOW REGULATOR MOTOR (for Front Door): INSPECTION; 2018 - 2024 MY Camry HV [07/2017 -        ]

INSPECTION

PROCEDURE

1. INSPECT POWER WINDOW REGULATOR MOTOR ASSEMBLY (FOR DRIVER DOOR)

(a) Connect a positive (+) auxiliary battery lead to connector terminal 2.

NOTICE:

Do not connect a positive (+) auxiliary battery lead to any terminals other than terminal 2 to avoid damaging the pulse sensor inside the motor.

*a

Component without harness connected

(Power Window Regulator Motor Assembly (for Driver Door))

*b

Clockwise

*c

Counterclockwise

*d

Motor gear

(b) Connect a negative (-) auxiliary battery lead to connector terminals 1 and 7 or 10.

(c) Check that the motor gear rotates smoothly as follows:

OK:

Measurement Condition

Specified Condition
  1. Connect a positive (+) auxiliary battery lead to terminal 2, connect a negative (-) auxiliary battery lead to terminal 1, and keep them connected for 3 seconds or more.
  2. With terminals 2 and 1 connected, connect a negative (-) auxiliary battery lead to terminal 10.

Motor gear rotates clockwise
  1. Connect a positive (+) auxiliary battery lead to terminal 2, connect a negative (-) auxiliary battery lead to terminal 1, and keep them connected for 3 seconds or more.
  2. With terminals 2 and 1 connected, connect a negative (-) auxiliary battery lead to terminal 7.

Motor gear rotates counterclockwise
  • If the result is not as specified, replace the power window regulator motor assembly (for driver door).

CAUTION:

Initialize the power window control system after installing the power window regulator motor and regulator assembly.

2. INSPECT POWER WINDOW REGULATOR MOTOR ASSEMBLY (FOR FRONT PASSENGER DOOR)

(a) Connect a positive (+) auxiliary battery lead to connector terminal 2.

NOTICE:

Do not connect a positive (+) auxiliary battery lead to any terminals other than terminal 2 to avoid damaging the pulse sensor inside the motor.

*a

Component without harness connected

(Power Window Regulator Motor Assembly (for Front Passenger Door))

*b

Clockwise

*c

Counterclockwise

*d

Motor gear

(b) Connect a negative (-) auxiliary battery lead to connector terminals 1 and 7 or 10.

(c) Check that the motor gear rotates smoothly as follows:

OK:

Measurement Condition

Specified Condition
  1. Connect the positive (+) auxiliary battery lead to terminal 2, connect a negative (-) auxiliary battery lead to terminal 1, and keep them connected for 3 seconds or more.
  2. With terminals 2 and 1 connected, connect a negative (-) auxiliary battery lead to terminal 10.

Motor gear rotates counterclockwise
  1. Connect a positive (+) auxiliary battery lead to terminal 2, connect a negative (-) auxiliary battery lead to terminal 1, and keep them connected for 3 seconds or more.
  2. With terminals 2 and 1 connected, connect a negative (-) auxiliary battery lead to terminal 7.

Motor gear rotates clockwise
  • If the result is not as specified, replace the power window regulator motor assembly (for front passenger door).

CAUTION:

Initialize the power window control system after installing the power window regulator motor and regulator assembly.