Last Modified: 11-20-2023 |
6.11:8.1.0 |
Doc ID: RM10000000156BF |
Model Year Start: 2018 |
Model: Camry HV |
Prod Date Range: [07/2017 -
] |
Title: WINDOW / GLASS: REAR POWER WINDOW SWITCH: INSPECTION; 2018 - 2024 MY Camry HV [07/2017 - ] |
INSPECTION
PROCEDURE
1. INSPECT REAR POWER WINDOW REGULATOR SWITCH ASSEMBLY (for LH/RH DOOR)
(a) Check the switch function.
(1) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
Tester Connection
|
Condition
|
Specified Condition
|
5 - 7
|
Auto up or up position
|
Below 100 Ω
|
4 - 7
|
Auto down or down position
|
Below 100 Ω
|
8 - 7
|
Auto up or auto down position
|
Below 100 Ω
|
5 - 7
|
Off
|
10 kΩ or higher
|
4 - 7
|
Off
|
10 kΩ or higher
|
8 - 7
|
Off
|
10 kΩ or higher
|
If the result is not as specified, replace the rear power window regulator switch assembly (for LH/RH door).
|
|
*a
|
Component without harness connected
(Rear Power Window Regulator Switch Assembly (for LH/RH Door))
|
|
|
(b) Check that the LED illuminates.
(1) Apply auxiliary battery voltage to the power window regulator switch assembly and check that the LED illuminates.
OK:
Auxiliary Battery Connection
|
Specified Condition
|
Auxiliary battery positive (+) → 3
Auxiliary battery negative (-) → 1
|
LED illuminates
|
If the result is not as specified, replace the rear power window regulator switch assembly (for LH/RH door).
|