Last Modified: 11-20-2023 |
6.11:8.1.0 |
Doc ID: RM10000000156B6 |
Model Year Start: 2018 |
Model: Camry HV |
Prod Date Range: [07/2017 -
] |
Title: WINDOW / GLASS: POWER WINDOW MASTER SWITCH: REMOVAL; 2018 - 2024 MY Camry HV [07/2017 - ] |
REMOVAL
PROCEDURE
1. REMOVE MULTIPLEX NETWORK MASTER SWITCH ASSEMBLY WITH FRONT DOOR UPPER ARMREST BASE PANEL
(a) Apply protective tape to the front door trim board sub-assembly as shown in the illustration.
|
Protective Tape
|
(b) Disengage the 3 clips, 15 claws and 8 guides as shown in the illustration.
|
Place Hand Here
|
|
Remove in this Direction
|
|
Order of Removal
|
(c) Disengage the guide as shown in the illustration.
|
Remove in this Direction
|
(d) Disconnect the connector to remove the multiplex network master switch assembly with front door upper armrest base panel.
(e) Engage the 3 clips, 8 claws and 3 guides to install the front armrest assembly as shown in the illustration.
|
Install in this Direction
|
2. REMOVE MULTIPLEX NETWORK MASTER SWITCH ASSEMBLY
(a) Remove the 3 screws and multiplex network master switch assembly.
|
|
|