Last Modified: 11-20-2023 |
6.11:8.1.0 |
Doc ID: RM100000001568G |
Model Year Start: 2018 |
Model: Camry HV |
Prod Date Range: [07/2017 - 10/2020] |
Title: PARK ASSIST / MONITORING: PARKING ASSIST ECU: REMOVAL; 2018 - 2020 MY Camry HV [07/2017 - 10/2020] |
REMOVAL
CAUTION / NOTICE / HINT
The necessary procedures (adjustment, calibration, initialization, or registration) that must be performed after parts are removed and installed, or replaced during television camera controller removal/installation are shown below.
Necessary Procedure After Parts Removed/Installed/Replaced
Replaced Part or Performed Procedure
|
Necessary Procedures
|
Effect/Inoperative Function when Necessary Procedure not Performed
|
Link
|
Disconnect cable from negative auxiliary battery terminal
|
Perform steering sensor zero point calibration
|
Lane departure alert system (w/ Steering Control)
|
|
Pre-collision system
|
Intelligent clearance sonar system*
|
Lighting system (w/ AFS)(EXT)
|
Memorize steering angle neutral point
|
Parking assist monitor system
|
|
Panoramic view monitor system
|
|
Replacement of television camera controller
|
-
Television camera controller initialization
-
Adjust steering angle
|
Panoramic view monitor system
|
|
Front passenger seat
|
Zero point calibration (Occupant classification system)
|
-
Occupant classification system
-
Passenger airbag ON/OFF indicator
-
Airbag system (Front passenger side)
-
Seat belt warning system (Front passenger)
|
|
CAUTION:
Some of these service operations affect the SRS airbag system. Read the precautionary notices concerning the SRS airbag system before servicing.
Click here
PROCEDURE
1. REMOVE FRONT SEAT ASSEMBLY RH
HINT:
Use the same procedure as for the LH side.
Click here
2. REMOVE PARKING ASSIST ECU COVER
(a) Remove the 3 clips and parking assist ECU cover.
|
|
3. REMOVE TELEVISION CAMERA CONTROLLER
(a) Disconnect each connector.
|
|
(b) Disengage the clamp.
(c) Turn back the front floor carpet assembly and front floor mat as shown in the illustration.
|
|
(e) Disengage the 2 guides and remove the television camera controller as shown in the illustration.
|
Remove in this Direction (1)
|
|
Remove in this Direction (2)
|
|