Last Modified: 11-20-2023 |
6.11:8.1.0 |
Doc ID: RM100000001568C |
Model Year Start: 2018 |
Model: Camry HV |
Prod Date Range: [07/2017 - 10/2020] |
Title: PARK ASSIST / MONITORING: TELEVISION CAMERA (for Rear): REMOVAL; 2018 - 2020 MY Camry HV [07/2017 - 10/2020] |
REMOVAL
CAUTION / NOTICE / HINT
The necessary procedures (adjustment, calibration, initialization, or registration) that must be performed after parts are removed and installed, or replaced during rear television camera assembly removal/installation are shown below.
Necessary Procedure After Parts Removed/Installed/Replaced
Replaced Part or Performed Procedure
|
Necessary Procedure
|
Effect/Inoperative Function when Necessary Procedure not Performed
|
Link
|
Rear television camera assembly (w/ Parking assist monitor system)
|
-
Parking assist monitor system initialization
-
Rear television camera assembly optical axis (Back camera position setting)
|
Parking assist monitor system
|
|
Rear television camera assembly (w/ Panoramic view monitor system)
|
-
Rear television camera view adjustment
-
Rear television camera assembly optical axis (Back camera position setting)
|
Panoramic view monitor system
|
|
PROCEDURE
1. REMOVE LUGGAGE COMPARTMENT DOOR OUTSIDE GARNISH SUB-ASSEMBLY
Click here
2. REMOVE REAR TELEVISION CAMERA ASSEMBLY WITH WIRE
(a) Disconnect the connector.
|
|
(b) Disengage the clamp.
(c) Disengage the 2 claws to remove the rear television camera assembly with wire as shown in the illustration.
|
Remove in this Direction
|
3. REMOVE TELEVISION CAMERA WIRE
(a) Disconnect the connector to remove the television camera wire.
|
|
4. REMOVE REAR TELEVISION CAMERA ASSEMBLY
|