PARK ASSIST / MONITORING: INTELLIGENT CLEARANCE SONAR SYSTEM: U0073,U0100,U0124,U0126,U0129,U0140,U0155,U0164,U0293; Control Module Communication Bus "A" Off; 2018 - 2020 MY Camry HV [07/2017

Last Modified: 11-20-2023	6.11:8.1.0	Doc ID: RM1000000015451
Model Year Start: 2018	Model: Camry HV	Prod Date Range: [07/2017 - 10/2020]
Title: PARK ASSIST / MONITORING: INTELLIGENT CLEARANCE SONAR SYSTEM: U0073,U0100,U0124,U0126,U0129,U0140,U0155,U0164,U0293; Control Module Communication Bus "A" Off; 2018 - 2020 MY Camry HV [07/2017 - 10/2020]

DTC

U0073

Control Module Communication Bus "A" Off

DTC

U0100

Lost Communication with ECM / PCM "A"

DTC

U0124

Lost Communication with Lateral Acceleration Sensor Module

DTC

U0126

Lost Communication with Steering Angle Sensor Module

DTC

U0129

Lost Communication with Brake System Control Module

DTC

U0140

Lost Communication with Body Control Module

DTC

U0155

Lost Communication With Instrument Panel Cluster (IPC) Control Module

DTC

U0164

Lost Communication with HVAC Control Module

DTC

U0293

Lost Communication with Hybrid Control Module

DESCRIPTION

These DTCs are stored if there is a malfunction in the CAN communication system connected to the clearance warning ECU assembly.

HINT:

If CAN communication system DTCs are stored, they may also be stored in other systems.

DTC No.	Detection Item	DTC Detection Condition	Trouble Area
U0073	Control Module Communication Bus "A" Off	Control module communication bus off	CAN communication system
U0100	Lost Communication with ECM / PCM "A"	Lost communication with hybrid vehicle control ECU	CAN communication system
U0124	Lost Communication with Lateral Acceleration Sensor Module	Lost communication with airbag ECU assembly	CAN communication system
U0126	Lost Communication with Steering Angle Sensor Module	Lost communication with steering sensor	CAN communication system
U0129	Lost Communication with Brake System Control Module	Lost communication with skid control ECU	CAN communication system
U0140	Lost Communication with Body Control Module	Lost communication with main body ECU (multiplex network body ECU)	CAN communication system
U0155	Lost Communication With Instrument Panel Cluster (IPC) Control Module	Lost communication with meter circuit plate	CAN communication system
U0164	Lost Communication with HVAC Control Module	Lost communication with air conditioning amplifier assembly	CAN communication system
U0293	Lost Communication with Hybrid Control Module	Lost communication with hybrid vehicle control ECU assembly	CAN communication system

1.	CHECK DTC OUTPUT

(a) Using the Techstream, check for DTCs according to the prompts on the screen.

HINT:

After turning the power switch from off to on (IG), wait 10 seconds or more before checking for DTCs.

(b) Clear the DTCs according to the screen on the Techstream.

OK:

No DTCs are output.

HINT:

If CAN communication system DTCs are stored, they may also be stored in other systems.
If the CAN communication system has been inspected and repaired in other systems, the DTCs will not be output when rechecking for DTCs.
If these DTCs are output frequently, duplicate the conditions that caused the problem symptoms and perform the inspection again, even though DTCs were not output when rechecking for DTCs.

USE SIMULATION METHOD TO CHECK