PARK ASSIST / MONITORING: INTELLIGENT CLEARANCE SONAR SYSTEM: C1AF7; RCTB Sensor; 2018 - 2020 MY Camry HV [07/2017

Last Modified: 11-20-2023	6.11:8.1.0	Doc ID: RM100000001544Y
Model Year Start: 2018	Model: Camry HV	Prod Date Range: [07/2017 - 10/2020]
Title: PARK ASSIST / MONITORING: INTELLIGENT CLEARANCE SONAR SYSTEM: C1AF7; RCTB Sensor; 2018 - 2020 MY Camry HV [07/2017 - 10/2020]

DTC

C1AF7

RCTB Sensor

DESCRIPTION

This DTC is stored when the clearance warning ECU assembly receives a signal from the blind spot monitor system via CAN communication indicating a malfunction in the blind spot monitor sensor.

DTC No.	Detection Item	DTC Detection Condition	Trouble Area
C1AF7	RCTB Sensor	Blind spot monitor sensor malfunction	Blind spot monitor system

PROCEDURE

1.	CHECK FOR DTC

(a) Using the Techstream, check for DTCs according to the prompts on the screen.

HINT:

After turning the power switch from off to on (IG), wait 4 seconds or more before checking for DTCs.

Body Electrical > Advanced Parking Guidance/ICS/Intuitive P/A > Trouble Codes

(b) Clear the DTCs according to the screen on the Techstream.

Body Electrical > Advanced Parking Guidance/ICS/Intuitive P/A > Clear DTCs

Body Electrical > Advanced Parking Guidance/ICS/Intuitive P/A > Trouble Codes

HINT:

DTC C1AF7 is stored when a malfunction signal sent from the blind spot monitor system is detected.
If the malfunctioning part has been repaired or replaced before rechecking for DTCs, DTC C1AF7 will not be output again.
If DTC C1AF7 is output frequently, duplicate the conditions that cause the problem symptoms and perform the inspection again, even though the DTC was not output when rechecking for DTCs.

Result	Proceed to
DTC C1AF7 is output	A
DTC C1AF7 is not output	B

GO TO BLIND SPOT MONITOR SYSTEM

USE SIMULATION METHOD TO CHECK