Last Modified: 11-20-2023 |
6.11:8.1.0 |
Doc ID: RM100000001544P |
Model Year Start: 2018 |
Model: Camry HV |
Prod Date Range: [07/2017 - 10/2020] |
Title: PARK ASSIST / MONITORING: INTELLIGENT CLEARANCE SONAR SYSTEM: C1652; Outside Air Temperature Sensor; 2018 - 2020 MY Camry HV [07/2017 - 10/2020] |
DTC
|
C1652
|
Outside Air Temperature Sensor
|
DESCRIPTION
When a malfunction signal sent from the air conditioning system via CAN communication is detected by the clearance warning ECU assembly, DTC C1652 is stored.
DTC No.
|
Detection Item
|
DTC Detection Condition
|
Trouble Area
|
C1652
|
Outside Air Temperature Sensor
|
Ambient temperature sensor malfunction
|
Air conditioning system
|
CAUTION / NOTICE / HINT
NOTICE:
-
After turning the power switch off, waiting time may be required before disconnecting the cable from the negative (-) auxiliary battery terminal. Therefore make sure to read the disconnecting the cable from the negative (-) auxiliary battery terminal notices before proceeding with work.
Click here
-
After replacing an ultrasonic sensor or the clearance warning ECU assembly, perform the necessary procedures (adjustment, calibration, initialization or registration).
Click here
PROCEDURE
1.
|
CHECK AIR CONDITIONING SYSTEM
|
(a) Using the Techstream, check for DTCs according to the prompts on the screen.
HINT:
After turning the power switch from off to on (IG), wait 13 seconds or more before checking for DTCs.
Body Electrical > Advanced Parking Guidance/ICS/Intuitive P/A > Trouble Codes
(b) Clear the DTCs according to the screen on the Techstream.
Body Electrical > Advanced Parking Guidance/ICS/Intuitive P/A > Clear DTCs
(c) Recheck for DTCs.
Body Electrical > Advanced Parking Guidance/ICS/Intuitive P/A > Trouble Codes
Result
|
Proceed to
|
DTC C1652 is output
|
A
|
DTC C1652 is not output
|
B
|
|