Last Modified: 11-20-2023 6.11:8.1.0 Doc ID: RM10000000152ZZ
Model Year Start: 2018 Model: Camry HV Prod Date Range: [07/2017 - 09/2019]
Title: VEHICLE PROXIMITY NOTIFICATION SYSTEM: VEHICLE PROXIMITY NOTIFICATION SYSTEM (w/o Rear Vehicle Approaching Speaker): DATA LIST / ACTIVE TEST; 2018 - 2019 MY Camry HV [07/2017 - 09/2019]

DATA LIST / ACTIVE TEST

DATA LIST

NOTICE:

In the table below, the values listed under "Normal Condition" are reference values. Do not depend solely on these reference values when deciding whether a part is faulty or not.

HINT:

Using the Techstream to read the Data List allows the values or states of switches, sensors, actuators and other items to be read without removing any parts. This non-intrusive inspection can be very useful because intermittent conditions or signals may be discovered before parts or wiring is disturbed. Reading the Data List information early in troubleshooting is one way to save diagnostic time.

(a) Connect the Techstream to the DLC3.

(b) Turn the power switch on (IG).

(c) Turn the Techstream on.

(d) Enter the following menus: Body Electrical / Vehicle Proximity Notification System / Data List.

(e) Read the Data List according to the display on the Techstream.

Body Electrical > Vehicle Proximity Notification System > Data List

Tester Display

Measurement Item

Range

Normal Condition

Diagnostic Note

Stop Light SW

Stop light switch signal

OFF or ON

OFF: Brake pedal released

ON: Brake pedal depressed

-

Permission Signal

Vehicle proximity notification system permission signal

OFF or ON

OFF: Vehicle proximity notification system operation prohibited (engine is operating or shift lever is in P).

ON: Vehicle proximity notification system operation permitted (engine is stopped and shift lever is not in P).

-

Operation Cancel SW

Vehicle approaching speaker switch signal

OFF or ON

OFF: Vehicle approaching speaker switch is not pressed

ON: Vehicle approaching speaker switch is pressed

-

Vehicle Speed

Vehicle speed

Min.: 0 km/h (0 mph), Max.: 255 km/h (158 mph)

Almost the same as actual vehicle speed

-

Proximity Sound Volume Adjustment

Warning sound volume setting

Standard, Standard +1 or Standard +2

Customized value displayed

-

Proximity Sound Level Increase (Vehicle Starting)

Warning sound amplifier function when vehicle starts off

OFF or ON

Customized value displayed

-

Proximity Sound Control (Vehicle Stationary)

Warning sound setting function when vehicle stopped

OFF or ON

Customized value displayed

-

Number of DTC

Number of trouble codes

0 to 255

Number of stored DTCs displayed

-

ACTIVE TEST

HINT:

Using the Techstream to perform Active Tests allows relays, VSVs, actuators and other items to be operated without removing any parts. This non-intrusive functional inspection can be very useful because intermittent operation may be discovered before parts or wiring is disturbed. Performing Active Tests early in troubleshooting is one way to save diagnostic time. Data List information can be displayed while performing Active Tests.

(a) Connect the Techstream to the DLC3.

(b) Turn the power switch on (IG).

(c) Turn the Techstream on.

(d) Enter the following menus: Body Electrical / Vehicle Proximity Notification System / Active Test.

(e) Perform the Active Test according to the display on the Techstream.

Body Electrical > Vehicle Proximity Notification System > Active Test

Tester Display

Measurement Item

Control Range

Diagnostic Note

Proximity Sound Indicator

Proximity sound indicator

OFF or ON

-

Proximity Sound (Vehicle Stationary)

Proximity sound (Vehicle stationary)

OFF or ON

Produces warning sound when vehicle is stopped

Proximity Sound (Low Speed)

Proximity sound (Low speed)

OFF or ON

Produces warning sound when vehicle is being driven at speeds of 10 km/h (6 mph)