Last Modified: 11-20-2023 6.11:8.1.0 Doc ID: RM10000000152CI
Model Year Start: 2018 Model: Camry HV Prod Date Range: [07/2017 -           ]
Title: POWER DISTRIBUTION: MAIN BODY ECU: INSTALLATION; 2018 - 2024 MY Camry HV [07/2017 -        ]

INSTALLATION

CAUTION / NOTICE / HINT

NOTICE:

  • Before replacing the main body ECU (multiplex network body ECU), refer to Registration.

    Click here 2018 - 2019 MY Camry HV [07/2017 - 09/2019]; THEFT DETERRENT / KEYLESS ENTRY: SMART KEY SYSTEM (for Start Function): REGISTRATION 2020 - 2022 MY Camry HV [09/2019 - 08/2022]; THEFT DETERRENT / KEYLESS ENTRY: SMART KEY SYSTEM (for Start Function): REGISTRATION 2023 - 2024 MY Camry HV [08/2022 -        ]; THEFT DETERRENT / KEYLESS ENTRY: SMART KEY SYSTEM (for Start Function): REGISTRATION

  • After the main body ECU (multiplex network body ECU) has been replaced, the automatic light control system will not operate until the engine is started.

PROCEDURE

1. INSTALL MAIN BODY ECU (MULTIPLEX NETWORK BODY ECU)

NOTICE:

  • Make sure that the connecting surfaces are free of foreign matter.
  • Do not touch the main body ECU (multiplex network body ECU) connector.

(a) Set the main body ECU (multiplex network body ECU) to the position where the guide of the main body ECU (multiplex network body ECU) contacts the housing sidewall of the instrument panel junction block assembly as shown in the illustration.

*a

20° or more

*b

Housing Sidewall

Set in this Direction

HINT:

Make sure to keep the angle at 20° or more as shown in the illustration.

(b) Slide the main body ECU (multiplex network body ECU) along the housing sidewall as shown in the illustration and engage the 2 guides.

*a

Housing Sidewall

Slide in this Direction

(c) While keeping the main body ECU (multiplex network body ECU) in contact with side A of the instrument panel junction block assembly (axis of rotation), lower it as shown in the illustration.

*a

Side A

Install in this Direction

(d) Press the push area until the claw engages to install the main body ECU (multiplex network body ECU).

*1

Instrument Panel Junction Block Assembly

*2

Main Body ECU (Multiplex Network Body ECU)

Push Area

NOTICE:

  • Make sure to press only the push area.
  • Confirm the engagement of the main body ECU (multiplex network body ECU) and instrument panel junction block assembly by listening for the click sound of the lock engaging.

HINT:

If a click sound cannot be heard, visually check the engagement of the lock. The engagement can also be confirmed if the main body ECU (multiplex network body ECU) and instrument panel junction block assembly are flush.

2. INSTALL WIRING HARNESS CLAMP BRACKET

(a) Engage the guide.

(b) Install the wiring harness clamp bracket with the nut.

Torque:

8.0 N·m {82 kgf·cm, 71 in·lbf}

3. INSTALL INSTRUMENT PANEL JUNCTION BLOCK ASSEMBLY WITH MAIN BODY ECU

(a) Connect the 2 connectors and raise the 2 lock levers to engage the 2 claws and lock the connector as shown in the illustration.

NOTICE:

Be sure to connect the connector securely.

Install in this Direction

(b) Engage the clamp.

(c) Engage the clamp.

(d) Engage the claw and guide to install the instrument panel junction block assembly with main body ECU.

Install in this Direction

(e) Install the 2 nuts and bolt.

Torque:

8.0 N·m {82 kgf·cm, 71 in·lbf}

(f) Connect the 2 connectors and raise the 2 lock levers to engage the 2 claws and lock the connector as shown in the illustration.

NOTICE:

Be sure to connect the connector securely.

Install in this Direction

(g) Engage the clamp.

(h) Connect each connector.

4. INSTALL NO. 3 INSTRUMENT PANEL TO COWL BRACE SUB-ASSEMBLY

Click here 2018 MY Camry HV [07/2017 - 09/2018]; HEATING / AIR CONDITIONING: AIR CONDITIONING UNIT: INSTALLATION+ 2019 MY Camry HV [09/2018 - 09/2019]; HEATING / AIR CONDITIONING: AIR CONDITIONING UNIT: INSTALLATION+ 2020 MY Camry HV [09/2019 - 10/2020]; HEATING / AIR CONDITIONING: AIR CONDITIONING UNIT: INSTALLATION+ 2021 - 2024 MY Camry HV [10/2020 -        ]; HEATING / AIR CONDITIONING: AIR CONDITIONING UNIT: INSTALLATION+

5. INSTALL LOWER NO. 1 INSTRUMENT PANEL AIRBAG ASSEMBLY

Click here 2018 - 2024 MY Camry HV [07/2017 -        ]; SUPPLEMENTAL RESTRAINT SYSTEMS: KNEE AIRBAG ASSEMBLY (for Driver Side): INSTALLATION