| Last Modified: 11-20-2023 | 6.11:8.1.0 | Doc ID: RM10000000152BY |
| Model Year Start: 2018 | Model: Camry HV | Prod Date Range: [07/2017 - ] |
| Title: DOOR / HATCH: FRONT DOOR OPENING TRIM WEATHERSTRIP: INSTALLATION; 2018 - 2024 MY Camry HV [07/2017 - ] | ||
INSTALLATION
CAUTION / NOTICE / HINT
HINT:
- Use the same procedure for the RH side and LH side.
- The following procedure is for the LH side.
PROCEDURE
1. INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP
(a) Align the alignment mark on the front door opening trim weatherstrip with the flange on the vehicle body indicated by the arrow in the illustration, and install the front door opening trim weatherstrip.
|
*a |
Alignment Mark |
|
Flange Position |
NOTICE:
- Always align the alignment mark with the flange when installing the part. If the alignment mark is not aligned, water ingress may occur.
- After installation, check that the corners fit correctly.
HINT:
- Make sure to install the part of the front door opening trim weatherstrip near the alignment mark first.
-
The color of the alignment marks on the front door opening trim weatherstrip LH and front door opening trim weatherstrip RH are different.
Alignment Mark:
Location
Color
for LH Side
Green
for RH Side
Red
2. INSTALL COWL SIDE TRIM SUB-ASSEMBLY
Click here
![2018 MY Camry HV [07/2017 - 09/2018]; INTERIOR PANELS / TRIM: ROOF HEADLINING: INSTALLATION+](/t3Portal/stylegraphics/info.gif)
3. INSTALL FRONT DOOR SCUFF PLATE
Click here
|
|