Last Modified: 11-20-2023 6.11:8.1.0 Doc ID: RM10000000151JV
Model Year Start: 2018 Model: Camry HV Prod Date Range: [07/2017 -           ]
Title: METER / GAUGE / DISPLAY: TRIP SWITCH: INSPECTION; 2018 - 2024 MY Camry HV [07/2017 -        ]

INSPECTION

PROCEDURE

1. INSPECT TRIP SWITCH

(a) Measure the resistance according to the value(s) in the table below.

Standard Resistance:

Tester Connection

Condition

Specified Condition

4 (RV) - 1 (E)

Light control rheostat up switch pressed

Below 50 Ω

Light control rheostat up switch not pressed

10 kΩ or higher

4 (RV) - 1 (E)

Light control rheostat down switch pressed

1.71 to 1.94 kΩ

Light control rheostat down switch not pressed

10 kΩ or higher

3 (A/B) - 1 (E)

ODO/TRIP switch pressed

Below 50 Ω

ODO/TRIP switch not pressed

10 kΩ or higher

If the result is not as specified, replace the trip switch.

*a

Component without harness connected

(Trip Switch)

(b) Illumination Inspection

(1) Apply auxiliary battery voltage to the trip switch and check that it illuminates.

OK:

Condition

Specified Condition

Auxiliary battery positive (+) → Terminal 5 (ILL+)

Auxiliary battery negative (-) → Terminal 2 (ILL-)

Illuminates

If the result is not as specified, replace the trip switch.

*a

Component without harness connected

(Trip Switch)