A25A-FXS (ENGINE CONTROL): KNOCK SENSOR: INSTALLATION; 2018 - 2024 MY Camry HV [07/2017

Last Modified: 11-20-2023	6.11:8.1.0	Doc ID: RM100000001510K
Model Year Start: 2018	Model: Camry HV	Prod Date Range: [07/2017 - ]
Title: A25A-FXS (ENGINE CONTROL): KNOCK SENSOR: INSTALLATION; 2018 - 2024 MY Camry HV [07/2017 - ]

INSTALLATION

CAUTION / NOTICE / HINT

NOTICE:

This procedure includes the installation of small-head bolts. Refer to Small-Head Bolts of Basic Repair Hint to identify the small-head bolts.

Click here

PROCEDURE

1. INSTALL KNOCK CONTROL SENSOR

HINT:

Perform "Inspection After Repair" after replacing the knock control sensor.

Click here

(a) Install the knock control sensor to the cylinder block sub-assembly with the bolt so that the knock control sensor installation position is as shown in the illustration.

Torque:

21 N·m {214 kgf·cm, 15 ft·lbf}

NOTICE:

If the knock control sensor has been struck or dropped, replace it.
Make sure that the knock control sensor is in the correct position.

*a	Top
*b	Right of Vehicle
*c	15°
*d	5°

(b) Connect the knock control sensor connector.

2. INSTALL INTAKE MANIFOLD

Click here

3. PERFORM INITIALIZATION

(a) Perform "Inspection After Repair" after replacing the knock control sensor.

Click here